Bedienungsanleitung Toshiba 65UA6B63DA (Seite 13 von 34) (Englisch)

754493

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

English - 12 -

one operator from the list. Highlight the desired

operator and press OK or the Right directional button

to proceed. Some of the following options may be

preset depending on the selected operator in this

step. Check the parameters before proceeding and

adjust if necessary.

 screen will be displayed

next. First Antenna type(*) should be set. Universal,

Single Cable and Jess Singlecable options are

available. Set the Antenna Type as Universal for

Direct and DiSEqC satellite systems. If you set the

antenna type as Universal, press the Right directional

button to proceed to the next step. If the antenna

type is set as Single Cable or Jess Singlecable,

there will be three more additional options on the

  screen: Tuner, Band

frequency and .  option

will be available if the Band frequency is set as User

. Set these options if available and press the

Right directional button to proceed.

(*) This option may be named as Satellite type depending on

the country selection.

After the parameters on the  

Setting screen are configured according to your

environment the next step may be Select Satellite

󰀨

depending on the selected antenna type and operator

in the previous steps. Highlight the desired satellite

option and press OK to set the parameters(*). The

Satellite Status       

set as On

satellite and to enable scan this option should be set

as OnBack button and select next satellite



changes, press the Right directional button to proceed.

(*) If you have a Direct satellite system, DiSEqC Set option

should be set as DiSEqC A.

Channel Scan screen will be displayed next. Select

Scan and press OK or the Right directional button

      

Skip Scan to proceed without performing a scan and

complete the initial setup.

 screen will be displayed next

if Scan option is selected. Following options will be

available: Scan Mode and Channels. You can choose

to perform a full scan or a network scan. Set the

Scan Mode accordingly. If you are going to perfrom a

network scan, make sure that you have adjusted the

Frequency, Symbol Rate (Ksym/s) and Polarization

parameters under the Transponder option accurately

on the Select Satellite screen. You may not be able

to change the Scan mode setting depending on the

previous selections. If the Channels option is set

as Free encrypted channels will not be installed.

Additional options may also be available depending

      

according to your preferences. Once you are done

with setting the available options, press the Right

directional button to start scan while Scan Mode or

Channels is highlighted. While the search continues

you can press the Back button to cancel the search.

The channels that have already been found will be

stored in the channel list.

When the initial setup is completed “Complete”

message will be displayed. Press OK   

setup.

A disclaimer of liability will be displayed on the screen.

You can use Up and Down directional buttons to scroll

through and read the entire text. Highlight Accept and

press OK to proceed.

Home Screen will be displayed. You can highlight Live

TV app and press OK to switch to Live TV mode and

watch TV channels.

Home Screen



be connected to the Internet. Connect the TV to a

home network with a high-speed Internet connection.

You can connect your TV wirelessly or wired to your

modem/router. Refer to the Network & Internet

and Connecting to the Internet sections for further

information on how to connect your TV to the internet.

The Home menu is the centre of your TV. Press the

Home button to display Home Screen. From the

Home menu you can start any application, switch to a

TV channel, watch a movie or switch to a connected

device. Depending on your TV setup and your country

selection in the initial setup the Home menu may

󰀨

The available options of the Home Screen are posi-

tioned in rows. To navigate through the Home Screen

options use the directional buttons on the remote.

Apps, YouTube, Google Play Movies & TV, Google

Play Music and Google Play related rows and rows of

the applications you have installed might be available.

Select a row then move the focus to the desired item

in the row. Press OK button to make a selection or to

enter a sub-menu.

On the upper left of the screen, search tools will be

located. You can choose either to type a word to start

a search via the virtual keyboard or try voice search

option if your remote has a built-in microphone.

Move the focus to the desired option and press OK

to proceed.

On the upper right of the screen, , Inputs,

Network & Internet (will be named as Connected or

Not Connected according to the current connection

status), Settings and the current time will be displayed.

       

using the Date & time menu options from the

Settings>Device Preferences menu.

Toshiba 65UA6B63DA Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 65UA6B63DA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info