Bedienungsanleitung Toshiba 65UL2163 (Seite 15 von 46) (Englisch)

804240

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

English - 14 - (**) Limited Models Only

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a

wall socket (220-240V AC, 50 Hz).

To switch on the TV from standby mode either:

 Press the Standby button, Programme +/-, a

numeric button, Guide button or Netflix button on

the remote control.

 Press the control button on the TV.

To Switch the TV Off

 Press the Standby button on the remote control.

 Press the control button on the TV, the function

options menu will be displayed. The focus will be

on the Standby option. Press and hold the button

for about 2 seconds to activate this option. The icon

colour of the option will change. Then press the

button once again, the TV will switch into standby

mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby mode, the standby

LED can blink to indicate that features such as Standby Mode

Search, Over Air Download or Timer is active. The LED can

also blink when you switch on the TV from standby mode.

First Time Installation

Note: If you are going to perform FRANSAT installation, insert

the FRANSAT card (optional) into the Conditional Access slot

of your TV before switching on your TV.

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK. In the following steps of

the installation guide, set your preferences using the

directional buttons and OK button.

After the language selection, you will be asked whether

you want to change accessibility settings. Highlight

Yes and press OK to change. Refer to System Menu

Content section for detailed information on available

options.

Set your country preference on the next screen.

Depending on the country selection you may be asked

to set and confirm a PIN at this point. The selected PIN

cannot be 0000. You have to enter it if you are asked

to enter a PIN for any menu operation later.

Note: M7(*) operator type will be defined according to the

language and country selections that you made in the First

Time Installation.

(*) M7 is a digital satellite service provider.

You can activate Store Mode option in the next step.

This option will configure your TV’s settings for store

environment and depending on the TV model being

used, the supported features of it may be displayed

on the screen as an info banner or the pre-installed

video file may be played back. This option is intended

only for store use. It is recommended to select Home

Mode for home use. Store mode option will be

available in Settings>System>More menu and your

preference for this setting can be changed later. Make

your selection and press OK to continue.

Depending on the model of your TV and the country

selection Privacy Settings screen may appear at this

point. Using the options on this screen you can set your

privacy privileges. Highlight a feature and use Left and

Right directional buttons or OK button to enable or

disable. Read the related explanations displayed on

the screen for each highlighted feature before making

any changes. You can use Programme +/- buttons to

scroll up and down to read the entire text. You will be

able to change your preferences at any time later from

the Settings>System>Privacy menu. If the Internet

Connection option is disabled Network/Internet

Settings screen will be skipped and not displayed.

If you have any questions, complaints or comments

regarding this privacy policy or its enforcement, please

contact by email at smarttvsecurity@vosshub.com.

Highlight Next and press OK button on the remote

control to continue and the Network/Internet Settings

screen will be displayed. Please refer to Connectivity

section if you need information on configuring a wired

or a wireless connection (availability depends on the

model) and other available options. If you want your

TV to consume less power in standby mode, you

can disable the Networked Standby Mode option

by setting it as Off. After the settings are completed

highlight Next and press OK button to continue.

On next screen you can set broadcast types to be

searched, set your encrypted channel searching

and time zone (depending on the country selection)

preferences. Additionally you can set a broadcast

type as your favourite one. Priority will be given to the

selected broadcast type during the search process

and the channels of it will be listed on the top of the

channel list. When finished, highlight Next and press

OK to continue.

About Selecting Broadcast Type

To turn a search option on for a broadcast type highlight

it and press OK, Left or Right directional button. The

checkbox next to the selected option will be checked.

To turn the search option off clear the checkbox by

pressing OK, Left or Right directional button after

moving the focus on the desired broadcast type option.

Digital Aerial: If D. Aerial broadcast search option

is turned on, the TV will search for digital terrestrial

broadcasts after other initial settings are completed.

Digital Cable: If D. Cable broadcast search option

is turned on, the TV will search for digital cable

broadcasts after other initial settings are completed. A

dialogue may be displayed depending on the country

selection before starting to search asking whether you

want to perform cable network search. If you select Yes

Toshiba 65UL2163 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 65UL2163

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info