Bedienungsanleitung Toshiba 65UL610U (Seite 41 von 106) (Englisch)

456109

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

Chapter 6: Basic features

Tuning channels

Setting the Channel Tuning Mode

You can select how tuning is handled for analog and

digital channels when the TV is in Antenna mode.

Note: To use this feature, ANT/CABLE In must be set to

Antenna (- p. 30).

1 > Settings > SETUP > TV Settings > .

2 Press B or b to highlight Channel Tuning Mode.

3 Press C or c to select a mode. Press .

Note: The Channel Options screen and the Channel

Browser ANT/CABLE List are updated when you change

the mode. The History List is cleared.

Tuning in to the next programmed

channel

Press or on the remote control or TV control

panel.

Note: This feature does not work unless you store

channels in the TV’s channel memory (- p. 30).

Tuning in to a specific channel

(programmed or unprogrammed)

Using the Channel Browser

™

The Channel Browser

™

is a helpful navigational

interface for all of your channels and inputs.

Features:

•Navigate the contents of all of your inputs.

•Keep a list of your favorite channels.

•Keep a history of the last 32 channels or inputs

viewed.

•Quickly surf and tune to your recently viewed

channels/inputs from the Channel Browser

™

History

List.

•Surf via Browse mode (to immediately tune to

channels as you highlight them in the

Channel Browser

™

) or Select mode (to surf channels

in the Channel Browser

™

before you select one to tune

to).

•Quickly change inputs from the Inputs List.

•Quickly select HDMI

CEC devices from the HDMI-

CEC Control List.

To set up the Channel Browser

™

1 > Settings > PREFERENCES > Channel

Browser Setup > .

2 Press b or B to highlight Navigation.

3 Press C or c to select Select Mode or Browse

Mode.

4 Select a list.

•History List

•ANT/CABLE List

• Inputs List

•Favorite List

•HDMI-CEC Control List

Note:

•The History List will be cleared every time the TV is

powered off.

•The HDMI-CEC Control List is not available when

Enable HDMI-CEC Control is set to Off (- p. 48).

5 Select On or Off.

6 To return to factory defaults, highlight Reset and

press .

To open the Channel Browser

™

• > Settings > APPLICATIONS > Channel

Browser > .

•Press or .

Mode Description

Standard

You can tune both analog and digital

channels normally.

Auto

(default)

Digital channels have priority when

manually entering a channel number

using the 0-9 buttons on the remote. To

tune analog channels, use / if

available.

Digital You can only tune digital channels.

Channel Description

Analog

Use the 0–9 buttons on the remote

control. (For example, to select

channel 125, press 1, 2, 5.) Press .

Digital

Use the 0–9 buttons on the remote

control to enter the major channel

number. Press the dash ( ) button.

Enter the sub-channel number. (For

example, to select digital channel 125-

1, press 1, 2, 5, –, 1.) Press .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 65UL610U Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info