Bedienungsanleitung Toshiba 65UL610U (Seite 66 von 106) (Englisch)

456109

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

Chapter 8: Advanced features

Manual Setup

1 > Settings > PREFERENCES > Network

Setup > .

2 Press B or b to select Wireless Setup. Press .

3 Press B or b to select Manual Setup. Press .

4 Press B or b to select Network Name. Press .

The Software Keyboard window appears.

5 Input the Network Name using the Software

Keyboard (- p. 68). To save your settings, press

the BLUE button.

6 Press B or b to highlight Authentication. Press C

or c to select Open/Shared, WPA-PSK, or WPA2-

PSK.

7 Press B or b to highlight Encryption. Press C or c

to select None, WEP, TKIP, or AES.

Note:

•Certain encryption types are only compatible with

specific authentication types.

-When Authentication is Open/Shared, only WEP or

None are compatible.

-When Authentication is WPA-PSK or WPA2-PSK,

only TKIP or AES are compatible.

•When incompatible Authentication/Encryption

pairings are attempted, a warning message will be

displayed, and no connection attempt will be made

until the incompatibility is resolved.

8 Press B or b to select Security Key. Press . The

Software Keyboard window appears.

9 Input the Security Key using the Software

Keyboard (- p. 68). To save your settings, press

the BLUE button.

Note: This item is grayed out when Encryption is

None.

10 Select Done. Press .

Note: When Encryption is None, a message will

appear. Press C or c to select Yes. Press .

Note: Settings are not saved if is pressed before

Done is selected.

Wireless Information

The settings configured in Wireless Setup can be

confirmed.

1 > Network > Wireless Information > .

2 A Wireless Information screen will appear.

Note: Press the RED button to check the availability of

surrounding APs.

Note: This feature is available from the Quick menu while

using Media Player or NET TV feature.

> Wireless Information > .

Note: Even if an AP for IEEE 802.11n is used when

Encryption is set to WEP or TKIP, the Speed value might

be low. We recommend that the Encryption setting be

changed to AES (Under manual setup).

Item Description

Status

Connected is displayed when the TV is

connected to the AP.

Disconnected is displayed when the

TV is disconnected from the AP.

Signal

Connection signal strength with the AP

(STRONG/MEDIUM/WEAK)

Speed The link speed with AP

Mode

Working mode (11a, 11b, 11g, 11n)

Channel The channel in use (1-165)

Network Name SSID set

Authentication Authentication set

Encryption Encryption set

Security Key Security Key set

AP MAC

Address

The AP's MAC address is displayed

when the TV is connected to the AP.

TV MAC

Address

The TV’s MAC address

DHCP

Enabled is displayed when you use

DHCP.

Disabled is displayed when you do not

use DHCP.

IP Address

The TV's IP address

Subnet Mask

Value of the Subnet Mask

Default

Gateway

Default GATEWAY’s address

DNS

DNS’s address

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 65UL610U Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info