Bedienungsanleitung Toshiba 65X9763 (Seite 20 von 35) (Englisch)

681924

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

English - 19 -

Now/Next Schedule

Navigate (Directional buttons): Press the

Directional buttons to navigate through the channels

and programmes.

Options (OK button): Displays event options.

Event Details (Info button): Displays detailed

information about selected programmes.

Filter (Blue button): Views ltering options.

Programme Options

Use the directional buttons to highlight a programme

and press OK button to display Event Options menu.

The following options are available.

Select Channel: Using this option, you can switch to

the selected channel.

Set Timer on Event / Delete Timer on Event: After

you have selected a programme in the EPG menu,

press the OK button. Select Set Timer on Event

option and press the OK button. You can set a timer

for future programmes. To cancel an already set timer,

highlight that programme and press the OK button.

Then select Delete Timer on Event option. The timer

will be cancelled.

Notes: You cannot switch to any other channel while there

is an active timer on the current channel.

It is not possible to set timer for two or more individual events

at the same time interval.

Teletext Services

Press the Text button to enter. Press again to activate mix

mode, which allows you to see the teletext page and the

TV broadcast at the same time. Press once more to exit. If

available, sections in the teletext pages will become colour-

coded and can be selected by pressing the coloured buttons.

Follow the instructions displayed on the screen.

Digital Teletext

Press the Text button to view digital teletext information.

Operate it with the coloured buttons, cursor buttons

and the OK button. The operation method may differ

depending on the contents of the digital teletext. Follow

the instructions displayed on the digital teletext screen.

When the Text button is pressed again, the TV returns

to television broadcast.

Software Upgrade

Your TV is capable of nding and updating the rmware

automatically via the broadcast signal or via Internet.

Software upgrade search via user interface

On the main menu select System>Settings and then

More. Navigate to Software upgrade and press the

OK button. In Upgrade options menu select Scan

for upgrade and press OK button to check for a new

software upgrade.

If a new upgrade is found, it starts to download

the upgrade. After the download is completed,

a warning will be displayed, press OK button to

complete software upgrade process and restart

TV.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock if

Automatic scanning option in the Upgrade options

menu is set to Enabled and if the TV is connected

to an aerial signal or to Internet. If a new software is

found and downloaded successfully, it will be installed

at the next power on.

Note: Do not unplug the power cord while led is blinking

during the reboot process. If the TV fails to come on after the

upgrade, unplug, wait for two minutes then plug it back in.

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in securely to a

wall outlet. Press the Power button on the TV.

Poor picture

• Check if you have correctly tuned the TV.

• Low signal level can cause picture distortion. Please

check antenna connections.

• Check if you have entered the correct channel

frequency if you have performed manual tuning.

No picture

• TV is not receiving any signal. Make sure the correct

source has been selected.

• Is the antenna connected properly?

• Is the antenna cable damaged?

• Are suitable plugs used to connect the antenna?

• If you are in doubt, consult your dealer.

No sound

• Check if the TV sound is muted. Press the Mute

button or increase the volume to check.

• Sound is coming from only one speaker. Check the

balance settings from Sound menu.

Remote control - no operation

• The batteries may be exhausted. Replace the

batteries.

• The batteries maybe inserted incorrectly. Refer to

the section “Inserting the Batteries into the Remote”.

No signal on an input source

• It is possible that no device is connected.

• Check the AV cables and connections from your

device.

• Check the device is switched on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba 65X9763 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 65X9763

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info