Bedienungsanleitung Toshiba 65X9863 (Seite 5 von 36) (Englisch)

681887

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

English - 4 -

In this case OLED Panel Noise Clean operation

will be performed when next time the TV is switched

into standby mode.

• This operation can be performed manually using

the OLED Panel Noise Clean option in the

Settings>Picture>Advanced Settings menu. This

operation will take about 1 hour and then the TV will

be switched off automatically. Do not unplug the

mains lead during this period. It is not recommended

to perform this operation more than once a year or

unless requested by authorised service personnel.

Pixel Shifting

• The images will be automatically shifted one pixel

every three minutes to prevent image sticking.



If the TV does not receive any input signal (e.g. from

an aerial or HDMI source) for 3 minutes, it will go

into standby. When you next switch-on, the following

message will be displayed: “



” Press OK to continue.

The    option(in the Settings>System

>More menu) could have been set to a value between

1 and 8 hours by default. If this setting is not set as Off

and the TV has been left on and not been operated

during the set time, it will switch into standby mode

after the set time has expired. When you next switch-on

the TV, the following message will be displayed. “



” Press OK

to continue. Before the TV switches into standby mode

a dialogue window will be displayed. If you do not

press any button the TV will switch into the standby

mode after a waiting period of about 5 minutes. You

can highlight Yes and press OK to switch the TV into

standby mode immediately. If you highlight No and

press OK, the TV will remain on. You can also choose

to cancel the  function from this dialogue.

Highlight  and press OK, the TV will remain on

and the function will be cancelled. You can enable this

function again by changing the setting of the 

OFF option from the Settings>System>More menu.



P+

V+

V-

P-

The joystick allows you to control the Volume /

Programme / Source and Standby-On functions of

the TV.

Note: The position of the joystick may differ depending on

the model.

To change volume: Increase the volume by pushing

the joystick right. Decrease the volume by pushing

the joystick left.

To change channel: Scroll through the stored

channels by pushing the joystick up or down.

To change source: Press the centre of the joystick

in, the sources list will appear on the screen. Scroll

through the available sources by pushing the joystick

up or down.

 Press the centre of the joystick in

and hold it down for a few seconds, the TV will turn

into standby mode.

 Press the centre of the joystick in,

the TV will turn on.

Note: Main menu OSD cannot be displayed via control button.

Operation with the Remote Control

Press the Menu button on your remote control to

display main menu. Use the directional buttons and

OK button to navigate and set. Press 

or Menu button to quit a menu screen.

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources. Press the

Source button on your remote control consecutively

to select the different sources.



You can change the channel and adjust the volume

by using the Programme  and  buttons

on the remote.



When the Menu button is pressed, the main TV menu

will appear at the bottom of the screen. You can

navigate through the menu items using the directional

buttons on the remote. To select an item or see the

sub-menu options of the highlighted menu press OK

button. When you highlight a menu option some of the

sub-menu items of this menu may appear on the upper

side of the menu bar for quick access. To use a quick

access item highlight it, press OK and set as desired

using the Left/Right directional buttons. When finished

press OK or  button to exit.

Press Exit button to close the main menu.

Home

When main menu is opened Home menu bar will

be highlighted. The content of the Home menu can

be customised by adding options from other menus.

Just highlight an option and press the Down direction

button on the remote. If you see Add to Home option

Toshiba 65X9863 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba 65X9863

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info