Bedienungsanleitung Toshiba BDX2000KU (Seite 37 von 64) (Englisch)

459664

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

37EN

FUNCTION SETUP

*)Settings with (*) are the default.

*1) An individual picture on the TV screen is called “Frame”, which consists of two separate images called “Field”.

Some pictures may be blurred at the auto setting in “Still Mode” setting due to their data characteristics.

Setting items Options

Still Mode

Adjusts picture resolution and quality

in still mode.

Auto*:

Automatically selects the best resolution setting (“Frame” or “Field”) based on

the data characteristics of the pictures.

Field:

Stabilizes the pictures, although the picture quality may become coarse due to

the limited amount of data. Select “Field” when the pictures are still unstable

even if “Auto” is selected.

Frame:

Displays relatively motionless pictures in higher resolution. “Frame” improves

the picture quality, although it may unstabilize the pictures due to alternate

output of 2-field data.

Note for “HDMI Video Resolution” and “Component Output”

• Even if you set “HDMI Video Resolution” setting to “Auto”, when this unit is connected to a DVI compatible display

devices with an HDMI-DVI cable, 480p signal will be output.

• Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.

• You cannot change the video resolution during Blu-ray Disc / AVCHD playback. To change the resolution, stop

playback.

• In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High Speed

HDMI Cable is recommended) and select “Auto” if the connected TV is compatible with 1080p24 frame input.

• Even if the connected TV is compatible with 1080p24 frame input and you set “HDMI Video Resolution” setting to

“Auto”, when the contents of the disc are not compatible for 1080p24 frame, 1080p60 frame will be output.

• If the picture is not output properly to the TV because of “HDMI Video Resolution” or “Component Output” setting,

press and hold [PLAY B] on the front panel for more than 5 seconds. Both settings will be reset to the default

automatically.

• For video resolution of the component output, you can only select the video resolution which is currently output

from HDMI OUT jack or “480i” if HDMI cable is connected.

• If the video resolution for the component output and HDMI video resolution do not match, the video resolution for

the component output will be switched to “480i”.

• COMPONENT VIDEO OUT jacks may not output any signals depending on the disc material.

• If you play back copy-protected DVD-video, 480p signal will be output from COMPONENT VIDEO OUT jacks, when

“Component Output” setting is set to “720p” or “1080i”.

• For AVCHD, 24-frame film material will be output as 60 frame, even if the connected device is compatible with

1080p24 frame input and “HDMI Video Resolution” is set to “1080p24”, “Auto” .

NTRODUCTION

ONNECTIONS

LAYBACK

FUNCTION SETUP O

THERS

E5PJ1UD_EN.book Page 37 Thursday, September 10, 2009 6:45 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba BDX2000KU Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info