Bedienungsanleitung Toshiba BDX2000KU (Seite 46 von 64) (Englisch)

459664

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

46 EN

FUNCTION SETUP

Set up the network connection settings in order to use the

BD-Live function with a BD-Live disc.

After you made IP address/DNS settings or when a LAN

cable is connected, always perform the connection test

to check if the connection is correctly made.

1 In stop mode, press [SETUP].

2 Use [K / L] to select , then press [ENTER].

3 Use [K / L] to select “Others”, then press

[ENTER].

4 Use [K / L] to select “Network Connection”,

then press [ENTER].

5 Use [K / L] to select “Connection Test”, then

press [ENTER].

Connection test will start automatically and the test result

will appear right after the connection test finishes.

• “Testing...” : The test is in progress.

• “Pass” : Connection test is successfully completed.

• “Fail” : Connection test failed.

Check the connection settings.

Press [ENTER] to go to the list of network status

confirmation screen.

6 Press [ENTER] to go back to the previous

screen, or press [SETUP] to exit.

Network settings are set to the following settings initially.

(In most cases, you can connect to the Internet without

making any changes to the default settings.)

If you want to set the network settings back to the default

settings as above (except “BD-Live Setting”), follow the

procedure below.

1 Follow steps 1 to 4 in “Connection Test” on this

page.

2 Use [K / L] to select “Enable(Easy)”, then press

[ENTER].

• The unit will start the connection test automatically

and the test result will appear right after the test

finishes.

• After the connection test finishes, press [ENTER] to go

to network status confirmation screen.

3 Press [ENTER] to activate the network settings

and set the network connection automatically.

Press [SETUP] to exit.

In following cases, select “Enable(Custom)” to set each

setting as necessary.

- When connection test failed with the setting of

“Enable(Easy)”.

- When instructed by your Internet service provider to

make specific settings in accordance with your

network environment.

• IP Address Setting / DNS Setting

1 Follow steps 1 to 4 in “Connection Test” on this

page.

2 Use [K / L] to select “Enable(Custom)”, then

press [ENTER].

3 Use [K / L] to select “IP Address Setting”, then

press [ENTER] repeatedly to select the desired

setting.

Network Connection

Connection Test

Note

• If the connection test passes, you can enjoy the

BD-Live functions using the Internet without making

any extra settings.

• If the connection test fails, you may need to change

the MAC address settings of your router. You can

check the MAC address of this unit on

“Enable(Custom)” screen.

• “Connection Test” is not available when “Disable” is

selected in “Network Connection”.

xxx.xxx.xxx.xxx

IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

then press ‘ENTER’

Others

Connection Test

Enable(Easy)

- IP Address Setting Auto(DHCP)

- DNS Setting Auto(DHCP)

- Proxy Setting Do Not Use

- Connection Speed Auto

- BD-Live Setting Allow

Note

• The setting of “BD-Live Setting” will not be set back

to the default, even if you follow the procedure.

Enable(Custom)

“Auto(DHCP)” : If your router has DHCP server

function, select “Auto(DHCP)”.

“Manual” : If your router does not have DHCP

server function, select “Manual”.

E5PJ1UD_EN.book Page 46 Thursday, September 10, 2009 6:45 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba BDX2000KU Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info