Bedienungsanleitung Toshiba BDX5400KE (Seite 15 von 58) (Englisch)

562903

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

English

This section describes the various setting option of

this Blu-ray Disc

player.

If the setup option is greyed out, it means the

setting cannot be changed at the current state.

System

1. In Setting menu, use / to select System

and press OK.

2. Use / to select an option and press OK.

3. Press or the RETURN button to return to the

previous menu.

1. Press the SETTING button in stop mode to

display the setup screen.

2. Press OK to enter the Setting menu.

3. Use

/ to select an option and press OK.

4. Press or the RETURN button to return to the

previous menu.

[SPDIF]

When you connect an audio system to the COAXIAL

DIGITAL output jack, the options are:

{Bitstream} - Selects Bitstream output if your

receiver SPDIF (Coaxial) IN supports Dolby or DTS

or PCM audio signal.

{PCM} - Selects PCM output if your receiver

SPDIF (Coaxial) IN only supports PCM stereo audio

signal.

{Re-encode} - Selects Re-encode output if your

receiver SPDIF (Coaxial) IN supports Dolby or DTS

and you want to hear both PIP audio and the movie

audio on Blu-ray™ video.

{Off} - No audio will be output via COAXIAL

DIGITAL output jack.

Audio

1. In Setting menu, use / to select Audio and

press OK.

2. Press / to select an option and press OK.

3. Use / to select the desired audio setting and

press OK.

4. Press or the RETURN button to return to the

previous menu.

[Down_samp]

Select the digital audio signal sampling frequency.

(Only Coaxial)

{48k} - For discs recorded at sampling rate of 48

kHz.

{96k} - For discs recorded at sampling rate of 96

kHz.

{192k} - For discs recorded at sampling rate of

192 kHz.

[HDMI]

When you connected a HDMI device to the HDMI

OUT jack, the available options are:

{Bitstream} - Selects Bitstream output if your

receiver HDMI IN supports Dolby or DTS or PCM

audio signal.

{PCM} - Selects PCM output if your receiver HDMI

IN only supports PCM audio signal.

{Re-encode} - Selects Re-encode if your

receiver’s HDMI IN supports Dolby or DTS and you

want to hear both PIP audio and movie audio on

Blu-ray™ video.

{Off} - No audio will be output via HDMI OUT

jack.

[Stereo Down Mix]

Select whether to downmix the multi-channel audio

into fewer channels.

[Dolby DRC]

Select the Dynamic Range Control mode which

makes it available to listen to a movie at a low

volume without losing sound clarity.

{Off} - Non-dynamic range compress.

{On} - Dynamic range compress.

{Auto} - Adjust the DRC according to input

audio.

The setting of Auto is effective for Dolby TrueHD.

{Stereo} - Downmixes the multi-channel audio

into two channel stereo. Choose when the Blu-ray

Disc™ player is connected to equipment that does

not support virtual surround function such as Dolby

Pro Logic.

{Surround Encoded (Lt/Rt)} - Downmixes

the multichannel audio into surround compatible

stereo. Choose when the Blu-ray Disc™ player

is connected to equipment that supports virtual

surround function such as Dolby Pro Logic.

6 Customizing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba BDX5400KE Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba BDX5400KE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info