Bedienungsanleitung Toshiba DR1SU (Seite 129 von 144) (Englisch)

31135

129

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

129

Recording

Playback

Editing

Library

Function setup

Others

Introduction

DVD Recorder Operation

AV Record Quality

DVD-RAM

DVD-RW

DVD-R

You can select from 5 combined picture and sound

quality recording settings prior to actual recording.

Actual selection applied becomes the default setting for

the normal recording or programmed recording.

e.g.

• To make a combination of picture and sound

quality settings.

Press the / / / buttons to select the

desired item (“Mode”, “Rate”, or “Audio Quality”)

2) Press the ADJUST button to change the setting

of each item.

• To apply the combination of picture and sound

quality settings.

1) Press the ADJUST button to change the

setting.

You can confirm the available recording time for

the selected setting on the bottom screen.

2) Press the ENTER button.

Notes

• You can change the combination of picture and sound

quality settings also by displaying the Quick Menu on a

LIBRARY MENU or during stop mode, then selecting “AV

Record Quality”. Either of the above methods updates the

setting of this recorder.

• If you set “SP” or “LP”, you cannot select “L-PCM”.

• Depending on the sound quality settings, the upper limit for

the picture quality setting differs.

• You can adjust the manual rate for picture quality by

0.2 Mbps from 2.0 to 9.2. (You cannot set the rate from 1.4

to 2.0.)

Picture Record Mode

DVD-RAM

DVD-RW

DVD-R

Adjusts problems with the brightness of video signals of

TV broadcasts or other external input.

(Only use this setting when you cannot adjust the

brightness satisfactorily with the Custom Picture Setting in

the Picture/Audio Settings (

Page 125) of this

recorder.)

Important:

• This setting changes the video signal to record and the

recorded signal is not returned to the original state even

when this setting is changed after recording. When

duplicating from VHS tape, if you can check the video

recording state beforehand, we recommend first playing

back for a while and checking the overall brightness

tendency, then setting an appropriate mode.

Standard:

The brightness of signals received with this recorder

and external input signals is adjusted automatically.

This is normally the setting to use.

Mode 1:

This setting is used to record the signals darker when

the screen is too bright.

Mode 2, 3, 4:

As the number rises, the signals are recorded brighter.

Use these modes to adjust the brightness.

Audio Input Level

DVD-RAM

DVD-RW

DVD-R

Sets the audio input level of recorded sound.

Press the

/ buttons to select the desired item, and

then press the

/ buttons to adjust the input level.

TV/CATV (L):

Sets the input level for the left channel.

(R):

Sets the input level for the right channel.

Line1, 2, 3 (L):

Sets the input level for the left channel of the external

input connectors.

(R):

Sets the input level for the right channel of the external

input connectors.

AV Record Quality

Custom Setting

/M1

/M2

/M1

L-PCM

Manual

6. 6

4. 6

2. 2

6. 0

3. 2

ModeSetting Rate

Audio Quality

Total Recording Time: approx. 122min.

(

with 4.7 GB unused)

D /M1

DVD

- - -

4.6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba DR1SU Seite 129

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info