Bedienungsanleitung Toshiba DVR3SG (Seite 16 von 56) (Englisch)

21430

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

English - 3130 - English

System Setup

Press the buttons to select Done and then

press OK button to confirm manual setting.

•

Repeat this procedure from step 5 onwards,

until all the required stations have been stored.

To... Then....

Select a Character

Press the button until

the required name character

is displayed (letters, numbers

or “ - ” character)

Move to the next or

Press the

¥buttons

previous character

respectively.

If you.. Then....

Wish to store the

• Press the

buttons until

station displayed the MFT is selected.

• Press the

¥buttons to

adjust the picture, if neces-

sary.

•

Select Done to store the station.

Do not wish to store

• Press the

buttons until

the station displayed

the CH is selected.

• Press the

¥buttons to

go on scanning the frequen-

cy band and display the

next station.

• Go back to the beginning of

step.

Clearing a Preset

Station

If you have stored a TV station:

• That you do not require

• At the wrong programme positiom you can cancel it.

Open “MENU”

With the DVD in Stop mode, press the MENU

button.

Select “Setup”

Using the buttons, move the selection bar

to “Setup” then press

 or OK button to select.

Select “Install”

Using the buttons, move the selection bar

to “Install”, then press

 or OK button to select.

Select “Manual Setup”

Using the buttons, move the selection bar

to “Manual Setup” then press

or OK button to

select.

Programme

System Setup

To change the programme’s name, press the 

button. The first letter of the name flashes.

Press the buttons until the NAME is select-

ed. The station name is set automatically from

the broadcast signal.

Presetting the Stations

Manually

Open “MENU”

With the DVD in Stop mode, press the MENU

button.

Select “Setup”

Using the buttons, move the selection bar

to “Setup” then press

 or OK button to select.

Select “Install”

Using the buttons, move the selection bar

to “Install”, then press

 or OK button to select.

Select “Manual Setup”

Move the selection bar to “Manual Setup”, using

the

buttons then press  or OK button to

select.

Press the buttons to select a PR number

as required then press

 or OK button to select.

Press the  button to select Edit.

Then press

 or OK button to be displayed

“Manual Setup” menu.

Press the ¥buttons to start scanning the

channels.

The frequency band is scanned and the first sta-

tion found is displayed.

Programme

Edit

Delete

Swap

Decoder

If you have already set then automatically, you do not

need to preset the stations manually.

Manual Setup

Name

Done

- - -

- - - - - -

- - - -

Decoder Off

MFT

TV System : G

Programme

Manual Setup

Name

Done

- - - - - -

A - - -

MFT

Decoder Off

: Ch 36

TV System : G

Programme

If you wish to cancel the auto scanning before the

end, press the OK button.

• The time and date are set automatically from

the broadcast signal. If the signal is weak or

ghosting occurs, the time and date may not be

set automatically.

• Once the auto scanning procedure has finished,

some stations may have been stored more than

once; select the stations with the best reception

and delete the ones no longer required.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba DVR3SG Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba DVR3SG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info