21430
22
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
English - 43
System Setup
42 - English
System Setup
Programme
Select “Tape Length”
Press the button to select the Tape Length.
This information is usually printed on the tape
box. The menu cycles through: E180, E240,
E280 or E300.
Once the type of cassette is set, the VCR can
display the amount of time remaining on the tape
when you press the DISPLAY button.
5
Select “VCR”
Using the  buttons, move the selection bar
to “VCR”, then press
or OK to select.
4
NICAM
AV 1 Output : RGB
: On
Programme
Programme
Select “Auto Repeat”
Move the selection bar to “ Auto Repeat”. It sets
the VCR to play a tape repeatedly [unless a tape
control is activated (Stop, Fast Forward or
Rewind).
7
Programme
Select “Auto Play”
Move the selection bar to “Auto Play,” then press
button to select from the following options:
• On - The VCR will automatically begin playing a
video tape when it is inserted, as long as
the safety tab of the cassette has been
removed.
• Off - Auto play is disabled.
6
VCR Setting
If you want your VHS Video tapes to play automatically
when you insert them, turn on Auto Play.
Select “System”
Use the  buttons to highlight “System” then
press the OK button.
3
Programme
Only tapes that are missing the Record Safety
Tab will play automatically when inserted.
Note
Select Change Password using  buttons,
then press the
or OK button.
• The ‘Enter the password.’ message will be
displayed.
1
Enter the 4-digit password using the 0 to 9 but-
tons on the remote control.
• The ‘Confirm the password.’ message will be
displayed.
2
Enter your password again using the 0 to 9 but-
tons on the remote control.
3
About the Change Password;
Press the RETURN or ¥ button to return to
the previous menu. Press the MENU button to
exit the menu.
Note
Open “MENU”
With the VCR in stop mode, Press the MENU
button.
1
Select “Setup”
Using the buttons, move the selection bar
to “Setup” then press
or OK button to select.
2
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Toshiba DVR3SG wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Toshiba DVR3SG

Toshiba DVR3SG Bedienungsanleitung - Deutsch - 58 seiten

Toshiba DVR3SG Bedienungsanleitung - Spanisch - 111 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info