Bedienungsanleitung Toshiba DVR80KF (Seite 68 von 80) (Englisch)

464710

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

This unit receives time signals from the analogue / DVB

channels, and set the clock automatically. Set the channel

tuning before setting Auto Clock.

1 Select “ON” using [K \ L], then press

[ENTER\OK].

2 Press [SETUP] to exit.

3 Press [B ON\STANDBY] to turn the unit off.

• The Auto clock function is activated.

• This unit will search for the time every time when the

power is turned off.

• Leave the unit off for about 10 seconds to give it time

to set the clock.

Note

• If you want to cancel “Auto Clock Setting”, select “OFF”

using [K \ L], and then press [ENTER\OK] at step

• If “Auto Clock Setting” is “OFF”, “Timer Recording

(EPG)” may not be able to perform.

• The clock may set itself automatically after you connect

the antenna cable to the unit and plug in the mains

cable. In this case, the current time will appear on the

front panel display.

• If there are only analogue channels memorised in this

unit:

- The channel assigned to “analogue / 1Ch” must

receive the PDC signal in order to set the clock

automatically.

- The unit will correct the current time by receiving PDC

broadcasts whenever the power is turned off.

- Between 23:00 and 1:00, the Auto Clock function will

not operate even when the power is turned off.

• The clock cannot be set automatically if you cannot

receive a channel in your area that carries a time signal.

In this case, set the clock manually.

• The unit will also correct the current time automatically

at 8:00 and 1:10 if the unit is in standby mode or if you

are watching DVB channel.

Setup A General Setting A DivX

Provides DivX

VOD registration code and deactivation

code.

Refer to page 45 for details.

Set the DivX

subtitle.

Setup A General Setting A HDMI

• Make sure that the HDMI cable is connected and the TV

input is set to HDMI.

You can select the colour space for HDMI output.

Set the appropriate colour space for your display device.

• When the connected device is not compatible with the

Y/Cb/Cr, HDMI signal is output as RGB regardless of

the setting.

If you do not want to output the audio through HDMI

(when you digitally output the audio through the DIGITAL

AUDIO OUT (COAXIAL) jack to your audio system, etc.),

you can set the HDMI audio output off.

• Set to “OFF” when the HDMI sound is not required.

You can adjust the RGB range to make the dark areas of

the HDMI images brighter.

• Select “Enhanced” if the black-white contrast is not

clear.

• This setting is effective only for HDMI RGB output.

B Auto Clock Setting (Default: ON)

DivX

A DivX® VOD

B DivX Subtitle (Default: OFF)

Auto Clock Setting

OFF

DivX® VOD

DivX Subtitle

OFF

English

French

Spanish

German

Italian

Swedish

HDMI

A Format (Default: RGB)

B HDMI Audio (Default: ON)

C RGB Range (Default: Normal)

Format

HDMI

udio

RGB Ran

Format

RGB

YCbCr

HDMI Audio

OFF

RGB Range

Normal

Enhanced

E9TK5FD_EN.book Page 68 Wednesday, January 13, 2010 10:33 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba DVR80KF Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba DVR80KF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info