Bedienungsanleitung Toshiba DVR80KF (Seite 71 von 80) (Englisch)

464710

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Introduction Connections Playback Editing OthersFunction SetupRecording VHS Functions

Basic Setup /

TV View Operation

Press [REC I] repeatedly until the desired

recording time (30 minutes to 8 hours) appears

on the TV screen.

One-touch Timer Recording will start.

• When the unit reaches the specified time, it will be turned off

automatically.

• To change the recording length during One-touch Timer

Recording, press [REC I] repeatedly until desired length

appears.

• To cancel One-touch Timer Recording within the specified

time, press [STOP C].

Note

• The remaining recording time will appear on the TV screen

during One-touch Timer Recording. Press [DISPLAY] to see

it on the TV screen.

• If VHS One-touch Timer Recording is completed during DVD

playback or recording, the VHS will be in stop mode and the

DVD keeps the current mode.

• You cannot use the pause function during One-touch Timer

Recording.

• When One-touch Timer Recording is finished and the power

is turned off, the unit will switch to the timer-standby mode

automatically if a timer recording has been programmed.

Press [TIMER SET] to cancel the timer-standby mode in

order to use the unit continuously.

5 Press [STOP C] when the recording is

completed.

To prevent accidental recording on a recorded cassette,

remove its record tab. To record on it later, cover the hole with

cellophane tape.

This function helps you to dub the contents in the DVC (digital

video camcorder) to VHS.

• Insert a recordable videotape.

• Make sure your DVC is in video mode.

1 Press [INPUT SELECT F] repeatedly to select

the external input channel, then press

[PROG. G\H] repeatedly to select DV(AV3).

2 Select the recording mode using [REC MODE].

(See page 70.)

3 Stop or pause the DVC where you want to start

dubbing.

4 Play back the DVC.

5 Press [REC I].

The dubbing will start.

Note

• Dubbing will start from where the tape is stopped.

1 Press [SEARCH] so that the index search menu

appears.

2 Enter the number of recordings you want to

skip using [the Number buttons] within 30

seconds.

3 Press [FWD D] or [REV E] to start index

search.

If you want to go in the forward direction, press

[FWD D].

If you want to go in the reverse direction, press [REV E].

After index search, the VHS will play back the tape

automatically.

Note

• This function is not available during recording.

• Every time a tape is recorded, an index mark is written on

the tape.

• You can make the index mark up to 20.

One-touch Timer Recording:

Prevent accidental erasure

0:30

8:00 7:30

1:00

Normal Recording

Record tab

DVC to VHS Dubbing

Preparing for DV dubbing (DVC to VHS):

Index Search

VHS

E9TK5FD_EN.book Page 71 Wednesday, January 13, 2010 10:33 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba DVR80KF Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba DVR80KF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info