681687
41
Zoom out
Zoom in
Vorherige Seite
1/75
Nächste Seite
Troubleshooting
9.
3
Tips for avoiding paper jams
By selecting the correct paper types, most paper jams can be
avoided. When a paper jam occurs, follow the steps outlined in
page 9.1.
Follow the procedures in page 2.3. Ensure that the
adjustable guides are positioned correctly.
Do not overload the paper input tray. Ensure that the paper
is below the paper capacity mark on the inside wall of the
paper input tray.
Do not remove paper from the paper input tray while your
machine is printing.
Flex, fan, and straighten the paper before loading.
Do not use creased, damp, or highly curled paper.
Do not mix paper types in the paper input tray.
Use only recommended print materials. See page 3.2.
Ensure that the recommended print side of print materials is
facing down in the paper input tray and facing up in the
manual feeder.
Understanding the Status LED
The
Status
LED on the control panel shows the status of your
machine. See the table below to know your machine’s status.
Status Description
Off The machine is off-line.
The machine is in Power Save mode.
When data is received, or any button is
pressed, it switches to on-line
automatically.
Green On The machine is on-line and can be used.
Blinking When the backlight slowly blinks, the
machine is receiving data from the
computer.
When the backlight normally blinks, the
machine is scanning the loaded
document.
When the backlight fast blinks, the
machine is printing data.
Red On The toner cartridge is totally exhausted.
Remove the old toner cartridge and
install a new one. See page 8.4.
A paper jam has occurred. To solve the
problem, see page 9.1.
The front cover is open. Close the front
cover.
There is no paper in the paper input
tray. Load paper in the paper input tray.
The machine has stopped due to a major
error. Check the display message. See
page 9.4 for details on the meaning of
the error message.
Blinking A minor error occurs and the machine is
waiting an error to be cleared. Check the
display message. When the problem is
cleared, the machine resumes.
The toner cartridge is low. Order a new
toner cartridge. You can temporarily
improve print quality by redistributing
the toner. See page 8.4.
41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Toshiba e-STUDIO 180s wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Toshiba e-STUDIO 180s

Toshiba e-STUDIO 180s Kurzanleitung - Holländisch - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info