681687
48
Zoom out
Zoom in
Vorherige Seite
1/75
Nächste Seite
Troubleshooting
9.
10
Common Windows problems
NOTE
: Refer to Microsoft Windows 98/Me/2000/XP/Vista
User’s Guide that came with your PC for further information on
Windows error messages.
Message appears on
your computer
screen:
“Device can't be
set to the H/W
mode you want.
“Port is being used
by another
program.
“Port is disabled.
•“Scanner is busy
receiving or
printing data.
When the current
job is completed,
try again.
“Invalid handle.
“Scanning has
failed.
There may be a copying or printing job in
progress. When that job is complete, try your job
again.
The Selected port is currently being used. Restart
your computer and try again.
The printer cable may be improperly connected or
the power may be off.
The scanner driver is not installed or the
operating environment is not set up properly.
Ensure that the machine is properly connected
and the power is on, Then restart your computer.
The USB cable may be improperly connected or
the power may be off.
Condition Suggested solutions
Condition Suggested solutions
“File in Use” message
appears during
installation.
Exit all software applications. Remove all software
from the StartUp Group, then restart Windows.
Reinstall the printer driver.
“Error Writing to
LPTx” message
appears.
Ensure that the cables are connected correctly,
the machine is on.
If bi-directional communication is not turned on
in the driver, it will also cause this message.
“General Protection
Fault,Exception
OE”, “Spool32”, or
“Illegal Operation”
messages appear.
Close all other applications, reboot Windows and try
printing again.
“Fail To Print”, “A
printer timeout error
occurred.” messages
appear.
These messages may appear during printing. Just
keep waiting until the machine finishes printing. If
the message appears in standby mode or after
printing has been completed, check the connection
and/or whether an error has occurred.
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Toshiba e-STUDIO 180s wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Toshiba e-STUDIO 180s

Toshiba e-STUDIO 180s Kurzanleitung - Holländisch - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info