481914
132
Zoom out
Zoom in
Vorherige Seite
1/184
Nächste Seite
1
2
3
4
5
6
7
9
10
11
12
8
7-10 WHEN THE GRAPHIC SYMBOL FLASHES
4. REPLACING PROCESS UNIT (Cont.)
11
Pull the tab to remove the sealing tape from the
Process Unit.
Important
Never touch the photoconductive drum (the green surface)
of the Process Unit. If the surface is scarred or scratches, it
will cause print quality problems.
Do not expose the photoconductive drum of the process
Unit to light for more than 3 minutes. If the Process Unit is to
be left anywhere outside the copier, be certain to cover it
with cloth, paper, etc.
12
Insert the new Process Unit all the way into the
copier. Then install the Toner Cartridge by reversing
the removal procedure.
Always hold the Process Unit by the colored handle. Do not
touch the green drum area. Do not leave the Process Unit
out of the copier for an extended period of time.
13
After installing the Toner Cartridge, move the
charger wire cleaning lever (in and out) of the
Process Unit several times to clean the charger
wire.
9Discard the used Process Unit properly.
10
Open the package and take the new Process Unit
out.
8Grasping the colored handle on top of the Process
Unit, remove the Process Unit from the copier.
14
Close the covers opened during this procedure and
latch the deplexing unit into position (if attached).
132

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Toshiba e-STUDIO 20 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Toshiba e-STUDIO 20

Toshiba e-STUDIO 20 Bedienungsanleitung - Deutsch - 187 seiten

Toshiba e-STUDIO 20 Bedienungsanleitung - Holländisch - 185 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info