Bedienungsanleitung Toshiba e-STUDIO 200s (Seite 71 von 99) (Englisch)

681689

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

Specifications

10.4

Supported Sizes of Paper

OTE

: You may experience jams when using print materials

with a length of less than 5 in. (127 mm). For optimum

performance, ensure that you are storing and handling the

paper correctly. Please refer to “Paper Storage Environment”

on page 10.5.

Paper

Dimensions

Weight

Capacity

Letter

8.5 x 11 in.

(216 x 279 mm)

• 16 to 24 lb

(60 to 90 g/m

bond) for the tray

with multi-pages

feeding

• 16 to 43 lb

(60 to 165 g/m

bond) for the tray

with single page

feeding and the

manual tray

• 150

sheets of

20 lb

(75 g/m

bond)

paper for

the tray

•1 sheet of

paper for

the tray or

manual

tray

8.3 x 11.7 in.

(210 x 297 mm)

Executive

7.3 x 10.5 in.

(184 x 267 mm)

Legal

8.5 x 14 in.

(216 x 356 mm)

5.8 x 8.2 in.

(148 x 210 mm)

4.1 x 5.8 in.

(105 x 148 mm)

ISO B5

6.9 x 9.8 in.

(176 x 250 mm)

JIS B5

7.2 x 10.1 in.

(182 x 257 mm)

Folio

8.5 x 13 in.

(216 x 330 mm)

Minimum size

(custom)

3 x 5 in

(76 x 127 mm)

16 to 43 lb (60 to 165

g/m

bond) for the

tray with single page

feeding and the

manual tray

1 sheet of

paper for

the tray or

manual tray

Maximum size

(custom)

8.5 x 14 in

(216 x 356 mm)

Transparency

Same minimum

and maximum

paper sizes as

listed above.

138 to 146 g/m

Labels

120 to 150 g/m

Cards

90 to 163 g/m

Envelopes

75 to 90 g/m

*. The machine supports a wide range of media sizes. See “Paper

Type, Input Sources, and Capacities” on page 3.1

**.Capacity may differ depending on media weight, thickness, and

environmental conditions.

Guidelines for Using Paper

For the best result, use conventional 20 lb (75 g/m

bond)

paper. Ensure that the paper is of good quality, and free of cuts,

nicks, tears, spots, loose particles, dust, wrinkles, voids, and

curled or bent edges.

If you are unsure of what type of paper you are loading, such

as bond or recycled paper, check the label on the package.

The following problems may cause print quality deviations,

jamming or even damage to the machine:

OTES

• Do not use letterhead paper printed with low-temperature

inks, such as those used in some types of thermography.

• Do not use raised or embossed letterhead.

• The machine uses heat and pressure to fuse toner to the

paper. Insure that any colored paper or preprinted forms use

inks that are compatible with this fusing temperature (200

°C or 392 °F for 0.1 second).

Symptom Problem with Paper Solution

Poor print quality or

toner adhesion,

problems with feeding

Too moist, too rough,

too smooth or

embossed; faulty paper

lot

Try another kind of

paper, between 100 ~

400 Sheffield, 4 ~ 5 %

moisture content.

Dropout, jamming,

curl

Stored improperly

Store paper flat in its

moisture-proof

wrapping.

Increased gray

background shading/

printer wear

Too heavy Use lighter paper.

Excessive curl

problems with feeding

Too moist, wrong grain

direction or short-grain

construction

Use long-grain paper.

Jamming, damage to

machine

Cutouts or perforations

Do not use paper with

cutouts or perforations.

Problems with feeding Ragged edges Use good quality paper.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba e-STUDIO 200s Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba e-STUDIO 200s

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info