Bedienungsanleitung Toshiba e-STUDIO 2309a (Seite 202 von 236) (Englisch)

681683

202

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

7 TROUBLESHOOTING

200 When This Message Appears

When This Message Appears

A message appears when a problem occurs on the equipment. Find the message on the list below and follow

the instructions in the Countermeasure.

Message Meaning Countermeasure

MISFEED xxxx An error code “xxxx” and a

message for solving the

problem are displayed.

Remove any misfed paper.

 P.202 “Paper Misfeed”

CHECK:PAPER SIZE The incorrect paper size has

been set for paper loaded on

the bypass tray.

Remove paper from the bypass tray and load it

again so that the display shows “BYPASS PAPER

SIZE”. Set the correct paper size. When you load

paper the size other than the standard ones,

select “CUSTOM” for the paper size.

CLOSE *** Any cover of the equipment

indicated by “***” is not

securely closed.

Close the cover securely.

DRAWER * EMPTY The paper in a drawer

indicated by “*” has run out.

Load paper in the drawer.

 P.24 “Loading paper in the drawer/Paper Feed

Unit”

COUNT OVER The number of pages

scanned has exceeded the

maximum value.

Select “PRINT” on the LCD screen to copy the

data scanned so far. Select “CANCEL JOB” to

delete all the data scanned so far.

CALL FOR SERVICE

xxxx

The repair or adjustment by

your service technician is

needed.

Contact your service representative.

Give the service technician the error code

(consisting of letters and numbers) that appears

in the upper right area of the LCD screen.

Never attempt to repair, disassemble or

modify the equipment by yourself.

This could cause an electric shock, a fire or

serious injury. Contact your service

representative when the equipment is in an

abnormal condition or any malfunction is found.

MAINTENANCE The maintenance by your

service technician is needed.

Contact your service representative.

BYPASS EMPTY Paper set on the bypass tray

has run out.

Load paper on the bypass tray.

 P.30 “Loading paper on the bypass tray”

TONER IS LOW There is only a little toner

remaining in the toner

cartridge.

There is still a little toner remaining in the toner

cartridge. Do not replace the toner cartridge until

“TONER EMPTY” appears on the LCD screen.

The message may not appear because the

toner remaining in the cartridge does not lie

evenly.

When the message appears, it is advisable

to purchase a new recommended cartridge

to prepare for its replacement.

ERROR : TONER The toner cartridge is not

installed correctly.

Install the toner cartridge correctly.

The recommended toner

cartridge is not being used.

If you are using a toner cartridge other than the

one we recommend, the equipment may not be

able to detect whether it is installed or not.

 P.3 “Recommended toner cartridges”

TONER EMPTY The toner in the toner

cartridge has run out.

Replace the toner cartridge with a new one.

 P.211 “Replacing Toner Cartridge”

MEMORY IS FULL

PRESS ANY KEY

The built-in memory of the

equipment has become full.

Press any button on the control panel to delete

the scanned data.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba e-STUDIO 2309a Seite 202

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba e-STUDIO 2309a

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info