Bedienungsanleitung Toshiba e-Studio 2802A (Seite 32 von 218) (Englisch)

804464

Zoom out

Zoom in

Vorherige Seite

1/218

Nächste Seite

2 COPY FUNCTIONS

30 Basic Copy Procedure

Basic Copy Procedure

Learn the basic copy procedure in this section. For the other various functions, see the following page:

 P.37 “Copy Settings”

Make sure that the equipment is ready to copy.

 P.16 “Preparation 1 - Turning Power ON”

 P.18 “Preparation 2 - Loading Paper”

 P.28 “Preparation 3 - Registering Paper Size and Type”

Acceptable originals

Acceptable originals differ depending on the setting position. See the table below for more details.

If you are using the Reversing Automatic Document Feeder, you can automatically scan a stack of plain paper

originals at one time.

*1 The automatic size detection function is only available when the Reversing Automatic Document Feeder is installed.

*2 The maximum number of sheets acceptable varies depending on the type of original.

Maximum number of originals scanned at one time

When you use “CONTINUE SCAN” with the Reversing Automatic Document Feeder (RADF), you can scan up

to 150 original sheets at one time. When the number of sheets to be scanned exceeds 150 or the built-in

memory in the equipment is full, scanning stops and an error message is displayed on the LCD screen. Press

any button on the control panel to delete the scanned data.

Precautions for Reversing Automatic Document Feeder

Do not use the following types of original as they may cause a paper misfeed or damage to the equipment:

Originals that are folded or curled

Originals with carbon copies

Originals that have been taped, pasted, or cut-out

Originals that have been clipped or stapled

Originals with holes or tears

Originals that are damp

Originals whose correction fluid or ink has not been dried completely

Overhead transparencies or tracing paper

Coated paper (e.g. coated with wax)

Originals with multiple holes punched (e.g. loose leaf paper)

The following types of originals can be used but need extra care:

Originals that you cannot slide with your fingers or whose surface is specially treated: They should be

fanned well before loading since they may not be able to be separated from each other at feeding.

Originals that are folded or curled: They should be smoothed out before being loaded.

When black streaks appear

If the scanning area or the guide area is dirty, image problems such as black streaks may occur. Weekly

cleaning of these areas is recommended.

 P.200 “Regular Cleaning”

Setting

position Type Maximum

size

Acceptable sizes for automatic

size detection*1

Maximum number

of sheets

Original glass Plain paper

Special paper

Booklets

A4 or LT - -

Reversing

Automatic

Document

Feeder

Plain paper

Thin paper

Thick paper

(50 - 104 g/m2,

13 - 27 lb.

Bond)

A3 or LD Other than North America and China:

A3, A4, A4-R, A5-R, B4, B5, B5-R

North America:

LD, LG, LT, LT-R, ST-R, COMP

China:

A3, A4, A4-R, A5-R, 8K, 16K, 16K-R

50 sheets (80 g/

m2, 20 lb. Bond)

(or stack height 9.5

mm)*2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba e-Studio 2802A Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info