Bedienungsanleitung Toshiba e-STUDIO 350 (Seite 12 von 322) (Englisch)

681690

Zoom out

Zoom in

Vorherige Seite

1/322

Nächste Seite

GENERAL PRECAUTIONS

When Installing or Moving

Warning

- This multifunctional digital system requires 220-240 V AC, 8 A 50/60 Hz electric power. For Saudi Arabia

100V version, it requires 100-127 V AC, 12 A 50/60 Hz electric power.

DO NOT use a power supply with a voltage other than that specified.

Avoid multiple connections in the same outlet. This could cause a fire or give you an electric shock. If you

are considering increasing the number of outlets, contact an electrician.

- ALWAYS connect this multifunctional digital system to an outlet with a ground connection to avoid the

danger of fire or electric shock in case of short-circuiting. Contact your service representative for the

details. Be sure to use a 3-conductor, grounded wall outlet.

In areas where a 2-pin plug is used, the multifunctional digital systems must be grounded for safety. Never

ground it to a gas pipe, a water pipe, or any other object not suitable for grounding.

- Plug the power cord securely into the outlet. If it is not plugged in properly, it could heat up and cause a

fire or give you an electric shock.

- DO NOT damage, break or attempt to repair the power cord.

The following things should not be done to the power cord.

- Twisting it - Bending it - Pulling it

- Placing anything on it - Making it hot - Situating it near radiators or other heat sources

This could cause a fire or give you an electric shock. If the power cord is damaged, contact your service

representative.

- When removing the plug from the outlet, DO NOT PULL the power cord. ALWAYS hold the plug when

removing it from the outlet. If the power cord is pulled, the wires may become broken and this could cause

a fire or give you an electric shock.

- Make sure that the ventilation holes are not blocked up.

If the temperature within the multifunctional digital systems becomes too high, a fire could result.

- DO NOT move the multifunctional digital systems to another building, up and down the stairs or for any

great distance.

This could cause an injury or give you and electric shock. When lifting or moving the multifunctional digital

systems, contact your service representative.

- DO NOT move the multifunctional digital systems with optional equipment, such as the finisher, attached.

This could cause a fire or give you an electric shock. When lifting or moving the multifunctional digital

systems, contact your service representative.

- When moving the multifunctional digital systems, be sure to shut down the power prior to pulling out the

plug from the outlet. If the power cord is damaged, this could cause a fire or give you an electric shock.

- The socket outlet should be near the equipment and be easily accessible.

- Pull out the plug from the outlet more than once a year to clean around the prongs. Accumulating dust

and dirt could cause a fire due to the heat released by electric leakage.

HUD_PPC_EU.book Seite 10 Sonntag, 13. Februar 2005 2:57 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba e-STUDIO 350 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba e-STUDIO 350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info