Bedienungsanleitung Toshiba e-STUDIO 353 (Seite 13 von 364) (Englisch)

681676

Zoom out

Zoom in

Vorherige Seite

1/364

Nächste Seite

Features

The e-STUDIO352/452 or e-STUDIO353/453 is a Multifunctional Digital Systems that is capable of using

each function via networks. The e-STUDIO352/452 or e-STUDIO353/453 also has various optional paper

handling devices to meet the needs of your office.

The e-STUDIO352/452 or e-STUDIO353/453 offers the following convenient features, functions and

options.

• The copying speed is 35 copies (A4) per minute for e-STUDIO352/353, 45 copies (A4) per minute for

the e-STUDIO452/453.

• Warm-up time has been drastically shortened to approximately 20 seconds*1.

• An all-in-one controller is installed to perform the effective network functions.

(To use the print, scan and Internet Fax functions, optional printer kit, scanner kit, printer/scanner kit,

etc. are required.)

• The input/output interface is designed for internet connection (access) environment.

• A 1/2 VGA wide panel improves operability and efficiency.

• A universal design is adopted for the control panel whose angle can be changed.

• The e-Filing function allows you to scan, save, reuse, and re-edit the original data via client PCs from

the scanning section.

• Received Fax documents can be stored in the e-Filing without printing them. (Optional FAX board is

required.)

• Scanned originals can be sent via Fax and E-mail simultaneously.

(To send them via Fax, optional FAX board is required. To send them via E-mail, optional printer/scan-

ner kit or scanner kit is required.)

• Electronic sorting improves copying productivity.

• Comes with rich editing functions such as trimming, masking and mirror.

• Loading the page memory and hard disk as standard equipment enables 2 in 1/4 in 1, Electronic sort-

ing and magazine sorting, etc.

• A fixing system that uses less oil reduces the amount of oil affixed to the paper.

• By simply replacing the cartridge, you can add toner without dirtying your hands.

• A wide variety of media from thick paper (up to 209 g/m²), sticker labels, OHP films, etc. is acceptable.

• Installing an optional finisher offers quick automatic sorting, stapling and hole punching (optional) of

copies.

• Installing a finisher with an optional saddle stitching function attached allows you to select the saddle

stitching mode which will automatically staple the centre of the documents just like a book.

• Installing a finisher with the optional manual staple function allows you only to staple the documents

without copying or printing them.

• When configured as a copier only, the auto shutoff feature will turn off the power switch on the

machine. When the optional printer/scanner kit, both printer kit and scanner kit, or Fax board is

installed, the machine will enter a Sleep mode and will re-activate when a job is received.

*1 This is the value when the room temperature is 20 °C (68 °F) or more at rated power input with no

options installed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba e-STUDIO 353 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba e-STUDIO 353

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info