Bedienungsanleitung Toshiba e-STUDIO 5525 (Seite 200 von 216) (Englisch)

804341

200

Zoom out

Zoom in

Vorherige Seite

1/216

Nächste Seite

4.OTHER PRINTING METHODS

200 Printing From UNIX/Linux

Text Length

The text length can be specified using the following options.

If the text length is set too high, part of the text may not appear due to the printer’s unprintable area. The text length

will be ignored if it is set to a value greater than the printer’s logical page length minus the top margin. The text length

is specified in rows from the top margin. Setting this value may affect the number of lines specified using the page

length option.

If this option is not specified, the command will not be sent so the printer’s default value will be used.

Example: The command to set the text length to 40 lines is “lp -o tl=40 <filename>”.

Banner Page

A banner page is automatically generated for each file in each job. The banner page is always sent as a PCL5e job,

including the following items.

 Name of the user who performed printing

Job ID number and workstation name from which the job was sent

Job title (This can be specified using the “-t” option. The same title controlled by the “lp” command is normally

applied to each job.)

Option specified when printing was performed

Number of printed sheets

Name of the printer and its IP address

Date and time

Only one copy of the banner page is printed for each file, even if a number of copies of the job are requested. The

banner page is sent to the equipment as a separate sub-job so that it is never stapled to the document.

The banner page is printed with the following settings.

Copies = 1.

Stapling off.

Hole punching off.

Orientation = portrait.

Duplex off.

Paper size as requested by the “-o” parameter or the printer’s default value.

The paper source and the media type for the banner page can be set to different values than the job’s paper source

and media type.

Auto paper source selection or the requested banner page source or media type.

Output bin as requested by the “-o” parameter or the printer default value.

6 lines per inch

Auto-wrap on.

Automatic carriage-return when a line-feed is sent.

The banner page is designed to fit the paper bigger than Statement / A5.

The banner page uses the default paper size if paper is set to:

-Statement

-A5

-A6

-B5

The default is that the banner page is printed before the job so that it is in the correct stacking order.

When the language is set to “raw” the banner is always disabled.

The paper source and the media type for the banner page can be set to values different than the job’s paper source

and media type. If a banner paper source is not specified then the auto source command is sent. If a banner media

type is not specified, then no banner media type command is sent, so the printer’s default value will be used.

If the file being printed specifies the paper destination or the paper size internally, the banner page may printed to

the wrong output or on an incorrect paper size.

Hole punching cannot be applied to banner pages.

Option Value Alternate Value Description

tl=value Set the length to value lines.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba e-STUDIO 5525 Seite 200

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba e-STUDIO 5525

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info