Bedienungsanleitung Toshiba e-STUDIO 655 (Seite 67 von 76) (Englisch)

481899

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Specications of Equipment

e-STUDIO555/655/755/855 Specications

Model name e-STUDIO555/655/755/855

Type Console type

Original glass Fixed

Printing (copying) system Indirect electrophotographic method

Developing system 2-component magnetic brush developing

Fixing method Induction heating

Photosensor type OPC

Original scanning system

Flat surface scanning system

(When the Reversing automatic document feeder is installed: Fixed scanning system by

feeding the original)

Original scanning sensor Linear CCD sensor

Scanning light source Xenon lamp

Resolution Scanning 600 dpi x 600 dpi

Writing 2400 dpi x 600 dpi (Smoothing process)

Acceptable originals Sheets, books and 3-dimensional objects

Acceptable original size Max. A3 or LD

Acceptable copy

paper size

Drawer A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP, 13”LG, 8.5”SQ, 8K, 16K,

16K-R

Bypass

Paper size within 100 - 297 mm (3.9" - 11.7") (Length), 148 - 432 mm (5.8" - 17") (Width)

Acceptable copy paper weight 64 - 209 g/m2 (17 lb. Bond - 110 lb. Index) (drawer and bypass feeding)

Warm-up time Approx. 130 sec.

First copy time (A4 or LT portrait) e-STUDIO555/655: less than 4.0 sec.,

e-STUDIO755/855: less than 3.5 sec.

Continuous copy speed Refer to the Copying Guide.

Multiple copying Up to 9999 copies (digital key entry)

Excluded image

width

Copy Leading edge: 3.0±2.0 mm (0.12”±0.08”), Trailing edge: 2.0±2.0 mm (0.08”±0.08”),

Both edge: 2.0±2.0 mm (0.08”±0.08”)

Printer Leading edge: 4.2±2.0 mm (0.17”±0.08”), Trailing edge: 4.2±2.0 mm (0.17”±0.08”),

Both edge: 4.2±2.0 mm (0.17”±0.08”)

Reproduction

ratio

Actual size 100±0.5%

Zoom 25 - 400% (in 1% increments)

For the Reversing automatic document feeder 25 - 200% (in 1% increments)

Paper supply Drawer Approx 500 sheets (80 g/m2, 20 lb. Bond)

Bypass Approx 100 sheets (80 g/m2, 20 lb. Bond)

Toner density adjustment Magnetic auto-toner system

Exposure control Automatic plus manual selection from 11 exposure step

USB interface USB 2.0 (Hi-Speed)

Environment (for normal use) Temperature: 10 ° - 30 °C (50 ° - 86 °F), Humidity: 20 - 85% (No Condensation)

Power requirements and Power

consumption

(including optional equipments)

AC 220-240 V±10%, 9 A (50/60 Hz): 2.0 kW or less

AC 115 V±10%, 20 A (50/60 Hz): 2.0 kW or less

AC 127 V±10%, 20 A (50/60 Hz): 2.0 kW or less (for Saudi Arabia 100 V version only)

Dimensions (equipment only) 698 mm (27.48") (W) x 789 mm (31.06") (D) x 1176 mm (46.3") (H)

Weight Approx. 226 kg (498 lb.) (equipment including developer and drum)

Space occupied (equipment only) 1395 mm (54.92") (W) x 789 mm (31.06") (D) (With fully extended bypass tray and opened

receiving tray)

Storage capacity Max. 2000 images (1 job) (Toshiba’s own chart)

• This specication varies depending on the printing conditions and the environment.

• Specications and appearance are subject to change without notice in the interest of product improvement.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba e-STUDIO 655 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba e-STUDIO 655

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info