Bedienungsanleitung Toshiba e-STUDIO 853 (Seite 7 von 368) (Englisch)

481897

Zoom out

Zoom in

Vorherige Seite

1/368

Nächste Seite

Notice to Users

For Germany only

After a suitable place has been selected for the installation of the e-STUDIO520/600/720/850 or e-

STUDIO523/603/723/853, please do not change it. Avoid excessive heat, dust, vibration and direct sun-

light. Also, provide proper ventilation as the copier emits a small amount of ozone.

The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993/EN 60825-1.1994 includ-

ing amendments.

The unit uses laser diode of output 10 mW, wave length 788 nm, continuous pulse.

Caution:

Use of controls or adjustments or performance of procedures other than those specified herein may

result in hazardous radiation exposure.

Warning:

This is a Class A product. In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

Working environment

From EMC (Electromagnetic Compatibility) point of view, the operation of this product is being restricted

in following environments:

* Medical Environments: This product is not certified as a medical product according to the Medical

Product Directive 93/42/EEC.

* Domestic environments (e.g. a private living room with TV / Radio sets in the nearby surrounding

area) because this is a so called EMC class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take adequate measures!

Any consequences resulting from the use of this product in restricted working environments are not the

responsibility of TOSHIBA TEC.

The consequences of the use of this product in restricted non-approved working environments may be

an electromagnetic interference with other devices or machines in the nearby surrounding area. This

can result into malfunction including data loss / data error pertaining to, this product or the other devices

/ machines involved in the electromagnetic interference.

Therefore Toshiba strongly recommends that the electromagnetic compatibility of this product be suit-

ably tested in all non-approved working environments before use. In the case of automobiles or aircraft,

the manufacturer or airline respectively should be asked for permission before use of this product.

Furthermore, for general safety reasons, the use of this product in environments with explosive atmo-

spheres is not permitted.

CE compliance

This product is labelled with the CE mark in accordance with the provisions of the applicable European

Directives, notably the Low Voltage Directive 2006/95/EC, the Electromagnetic Compatibility Directive

2004/108/EC for this product and the electric accessories, the Radio Equipment and Telecommunica-

tions Terminal Equipment Directive 1999/5/EC for the telecommunication accessories.

CE marking is the responsibility of TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH, Carl-

Schurz-Str. 7, 41460 Neuss, Germany, phone +49-(0)-2131-1245-0.

For a copy of the related CE Declaration of Conformity, please contact your dealer or TOSHIBA TEC.

Machine Noise Information

Ordinance 3. GPSGV: The maximum sound pressure level is equal or less than 70 dB(A) according to

EN ISO 7779

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba e-STUDIO 853 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba e-STUDIO 853

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info