Bedienungsanleitung Toshiba lcd data projector tlp x2500a (Seite 15 von 31) (Englisch)

215050

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Operations

■ Using auto setting (Only for input from computer)

This function sets up the projector to the optimum state such as

sampling phase, frequency, screen position, and clamp for each

type of the input signal by using simple operations.

Press the remote control’s AUTO SET button.

For computer input, the icon will appear during processing.

You can set as well by selecting [Auto setting] in the Image

adjustment menu

p.37

Notes

• The image may not be projected or auto adjustment/setting may not be performed

correctly for input signals other than those supported by the projector

p.57

p.58

• If auto setting fails adjustment, adjust manually with [Position] in the Image

adjustment menu

p.37

■ Correcting the keystone distortion

When the projector placement angle against the

screen is changed while projecting the image,

the picture will undergo keystone (trapezoidal)

distortion.

This projector is capable of correcting this keystone

distortion

Press the KEYSTONE button.

The Keystone menu appears. By default, [Auto v-keystone] is selected.

Item Description

Automatically corrects the vertical distortion.

Press .

Screen shrinking at Screen shrinking at

bottom top

Auto v-keystone

V-keystone

Using handy features

Control panel

Remote

Control

Before correction

After correction

Remote

Control

Projector placement angle adjustments

The placement angle and the height of the projected image can be adjusted by the foot

adjuster.

q Lift up the front of the projector to

the desired angle, then press the

foot adjuster release button.

The foot adjuster extends. Release the

button to lock the position.

w To fine adjust the angle, twist the

foot adjuster.

e To adjust the horizontal angle, use

the right and left tilt adjusters.

•To stow the foot adjuster, hold up the projec-

tor while pressing the foot adjuster release

button, then slowly lower the projector.

Adjusting the screen size and focus

Use the zooming lever to adjust the screen size.

w Use the focusing ring to adjust the focus.

Adjusting the volume with the buttons

The speaker volume can be adjusted when an audio signal is being input.

Notes

• Note that lamp characteristics may rarely cause the brightness to fluctuate slightly.

•A lamp is consumable item. If used for extended periods, images will appear dark, and

the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The

lifetime of the lamp depends on conditions of use.)

• The LCD panel is made using extremely advanced technology, but there may be black

spots (pixels that do not light) or bright spots (pixels that are constantly lit) on the panel.

Please note that these are not malfunctions.

• Although this projector supports a wide range of RGB signals

p.57

, any resolutions not

supported by this projector (XGA) will be expanded or shrunk, which will affect image

quality slightly. To view high-quality images, it is recommended that the computer’s

external output should be set to XGA resolution.

• With some models of computer having LCD displays or the like, displaying images

simultaneously on the projector and the monitor’s display may prevent the images from

displaying properly. If this happens, turn off the computer’s LCD display. For information

on how to turn off the LCD display, see the owner’s manual of your computer.

• If no signal is being input from the connected equipment or signal input is stopped while

projecting, the “No signal” will appear.

• If a signal not supported by the projector is input, the “Unsupport signal” will appear.

• If an unavailable operation button is pressed, the

icon will appear.

Basic operation (Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba lcd data projector tlp x2500a Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info