Bedienungsanleitung Toshiba mt400 dlp projector (Seite 19 von 23) (Englisch)

215053

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Others

English Français Español Deutsch Italiano

Português

Svenska

If you think something is wrong, check the followings before contacting customer service.

Please see “Trouble indications”

p.36

as well.

If This Happens Check

No power

Power goes out

during use

No picture

Picture not

displayed

correctly

Picture blurred

Part of picture

out of focus

Image is dark

Colors too light

Bad shading

Remote control

doesn’t work

Before calling service personnel

• Is the power cord plugged in? Is it connected to the projector?

• Is the lamp cover loose?

p.34

• Is the ambient temperature high?

p.36

• Is the air intake or air exhaust blocked?

p.36

• Is the projector turned on?

p.23

• Is the mute function on?

p.27

• Is the brightness setting minimized?

p.29

• Are the connections set up correctly?

p.20

• Are all the connected devices functioning properly?

• Is the input signal supported by the projector?

p.39

p.40

p.41

• Is there something generating an abnormal video signal, for

instance the video tape?

• Is the lens dirty?

p.35

• Is the lens focus adjusted optimally?

p.24

• Is the projection distance within the projector’s supported range?

p.19

• Is the projector’s screen placement angle tilted too far?

p.19

• Are the sharpness or sampling phase adjustments off?

p.26

p.29

• Are the brightness or contrast adjustments off?

p.29

• Is the lamp nearing the end of its service life?

p.32

• Are the color, tint, R-level, G-level, or B-level adjustments off?

p.29

• Is the screen dirty?

• Is the lamp nearing the end of its service life?

p.32

• Are the remote control’s batteries drained?

• Are the batteries inserted into the remote control correctly?

p.18

• Is the remote control being used within the effective range?

p.18

• Are there any obstructions between the remote control and

projector?

• Are there any fluorescent or other bright lights shining at the

projector’s infrared remote sensor?

The indicator lights inform you of internal abnormalities.

No power

⇒ Problem with projector

• Unplug the power cord, and contact your dealer.

⇒ The lamp cover is not properly attached.

• Unplug the power cord, and reattach the lamp cover.

p.34

Lamp went out during use, or won’t come on

⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of

the lamp has ended or the projector is malfunctioning.

•

Unplug the power cord and wait for a short while, then turn the power back on.

• If a lamp burns out, replace it with a new one.

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

Power went out during use

⇒ Internal overheating, or the outside temperature is too high.

• Place the projector so that the air intake and exhaust are not blocked.

•

Unplug the power cord and wait for a short while, then turn the power back on.

❈ The icon will appear before the power goes out.

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

Power went out during use

⇒ Problem with internal cooling fan.

• Unplug the power cord, and contact your dealer.

❈ The

icon will appear before the power goes out.

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

Power went out during use

⇒ Problem inside the projector.

•

Unplug the power cord and wait for a short while, then turn the power back on.

• If the above action will not clear the problem, unplug the power cord,

and contact your dealer.

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

PRECAUTION

• Make sure to unplug the power cord if something goes wrong.

(Off)

Or (Orange lit)

(Red lit)

Trouble indications

Others

(Red lit)

(Green lit)

(Red lit or flashing)

(Red lit)

(Red lit or flashing)

(Red lit)

(Green lit

or Off)

(Green

flashing)

(Green lit

or Off)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba mt400 dlp projector Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info