Bedienungsanleitung Toshiba MW14F51 (Seite 46 von 72) (Englisch)

34219

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Basic playback (DVD)

To pause playback (still mode)

Press PAUSE during playback.

To resume normal playback, press

PLAY.

• The sound is muted during still

mode.

To stop playback

Press STOP.

To remove the disc

Press OPEN/CLOSE.

Remove the disc after the disc tray

opens completely.

Be sure to press OPEN/CLOSE to close the disc tray

after you remove the disc.

Notes:

• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen

according to the type of loaded disc. In this case, check your disc again (see pages 9 and 61).

• Some discs may take a minute or so to start playback.

• When you set a single-faced disc label downwards (ie. the wrong way up) and press OPEN/CLOSE or PLAY on the unit,

“Reading Disc” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed.

• Some discs may not work the resuming facility.

• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 53.

• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according

to the disc contents the software producers designed, some playback features may not be available. Also refer to the

instructions supplied with the DVDs.

• Do not move the unit during playback. Doing so may damage the disc.

• Use OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the unit

to malfunction.

• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to

malfunction.

• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen

menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press

POWER on your remote control once the movie is completed.

• There may be a slight delay between you pressing the button and the function activating.

• If the Media card is inserted during the playback, playback will stop and change to the CARD mode automatically. If you wish

to change to the DVD mode, press DVD/CARD.

To obtain a higher quality picture

Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen

while playing a DVD video disc because the high resolution pictures on these discs include a lot of information.

While the amount of noise depends on the TV you use with this unit, you should generally reduce the sharpness

adjustment on your TV when viewing DVD video discs.

About

DVD VCD CD

CARD

The

DVD VCD CD

CARD

icons on the heading bar show the playable discs for the function described under that

heading.

: You can use this function with DVD video discs.

VCD

: You can use this function with Video CDs.

: You can use this function with Audio CDs and CD-R/RW CDs.

CARD

: You can use this function with Media cards.

DVD

VCD

Basic playback

Playing a disc (Continued)

5T90101A [E]p45-48 3/8/05, 10:26 AM46

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba MW14F51 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info