Bedienungsanleitung Toshiba p7 dlp projector (Seite 46 von 64) (Englisch)

215056

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

E-45

View

•Perform this operation while projecting the picture for which the adjustment/setting will be made.

• Select the menu name “View”.

See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will

differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.

Aspect

This function sets the horizontal and vertical picture proportions of the

input signal.

Select the item name “Aspect” and select the setting contents with the SE-

LECT ̇̈ buttons.

Filter

This function sets the sharpness when the input signal is adjusted to

the resolution of the projector and enlarged or reduced.

Select the item name “Filter” and select the setting contents with the SELECT

̇̈ buttons.

Smaller numerical values result in a sharper picture and larger values result in

a softer picture. Please select your desired setting value.

Video Signals

Auto ............ While maintaining the aspect ratio, projects a full screen

so that no portions extend beyond the boundaries of the

screen. The top and bottom of the 16:9 image becomes

black.

Wide ........... Projects to fill the full width with the entire image at 16:9.

(This feature is used to project a squeezed image in a

proper aspect ratio.)

Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the

screen. (Portion that extend off screen is cut.)

Aspect ratio selection Auto Wide Zoom

4:3 screen

16:9 screen

Personal Computer Signal

Auto ............ Automatically enlarges or reduces the image to project

a full screen in a ratio of 4:3

Direct .......... Maintains the aspect ratio and projects a picture of the

maximum displayable size

Real ............ Projects the input signal without pixel conversion

Input Signal Auto Direct Real

The setting is higher

than the display reso-

lution of the projector.

The setting is lower

than the display reso-

lution of the projector.

See “Selection of Aspect Ratio” on Page E-29 for diagrams of projection screen

images that correspond to the input signals.

Note:

Please note that using this monitor for the purpose of commercial gain or the at-

traction of public attention in a venue such as a coffee shop or hotel and projecting

a 4:3 screen in wide mode or leaving a squeezed screen as a compressed image

raises concern about the infringement of the copyright holder’s rights which are

protected by copyright law.

Note:

When selection has been made for the “Real” setting of the personal computer

signal (i.e., when the input signal and the projector display resolution are high) and

the “Zoom” setting of the video signal, pressing the SELECT

̆̄̇̈

buttons on

the remote control will permit movement of the display position. Note that there will

not be any movement when the menu or the quick menu is displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba p7 dlp projector Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info