Bedienungsanleitung Toshiba RAS-10SAV (Seite 2 von 4) (Englisch)

497517

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Press

FIX

: Move the louver in the

desired vertical direction.

Press

SWING

: Swing the air

automatically and press again to stop.

For horizontal direction, adjust

manually.

DANGER

•

Do not install, repair, open or remove the cover. It may expose you

to dangerous voltages. Ask the dealer or the specialist to do this.

•

Turning off the power supply will not prevent potential electric

shock.

•

The appliance shall be installed in accordance with national wiring

regulation.

•

Means for disconnection from the supply having a contact

separation of at least 3 mm in all poles must be incorporated in the

ﬁ xed wiring.

WARNING

•

Do not expose your body directly to cool air for a long time.

•

Do not insert your ﬁ nger or any article into the air inlet/outlet.

•

When an abnormality (burning smell, etc.) occurs, stop the air

conditioner and disconnect the power supply or turn off the

breaker.

CAUTION

•

Do not wash the unit with water. It may cause an electric shock.

•

Do not use this air conditioner for other purposes such as

preserving food, breeding animal, etc.

•

Do not step or put anything on the indoor/outdoor unit. It may

cause an injury or damage the unit.

•

Do not touch aluminium ﬁ n because it may cause an injury.

•

Before cleaning the unit, turn off the main switch or the circuit

breaker.

•

When the unit won’t be used for a long time, turn off the main

switch or the circuit breaker.

•

It is recommended that maintenance be performed by a specialist

when the unit has been operated for a long time.

PRECAUTIONS FOR SAFETY

INDOOR UNIT DISPLAY

1 Hi POWER (Green)

2 FILTER (Orange)

3 PURE (Blue)

(10, 13, 16SKVR-A series)

3 PRE DEF (DE-FROST) (Orange)

(13, 16SKV-A series)

4 TIMER (Yellow)

5 OPERATION (Green)

6 RESET button

Hi POWER FILTER PURE TIMER OPERATION

RESET

PREPARATION BEFORE USE

Preparing Filters

1. Open the air inlet grille and remove the air ﬁ lters.

2. Attach the ﬁ lters. (see detail in the accessory sheet).

Loading Batteries

1. Remove the battery cover.

2. Insert 2 new batteries (AAA type)

following the (+) and (–) positions.

Clock Setup

1. Push CLOCK

●

by tip of the pencil.

2. Press

OFF

: adjust the time.

3. Press

SET

: Set the time.

Remote Control Reset

1. Remove the battery.

2. Press

3. Insert the battery.

AIRFLOW DIRECTION

• Do not move the louver manually by others.

• The louver may automation positioning by come operation mode.

Note:

REMOTE CONTROL

PRESET

ONE-TOUCH

QUIET

SWING

TIMER

FILTER

CHK

CLOCK

OFF

CLR

SLEEP

SET

FIX Hi-POWER ECO

PURE

COMFORT

SLEEP

MODE

TEMP

FAN

(

)

1 Infrared signal emitter

2 Start/Stop button

3 Mode select button (MODE)

4 Temperature button (TEMP)

5 Fan speed button (FAN)

6 Swing louver button (SWING)

7 Set louver button (FIX)

8 On timer button (ON)

9 Off timer button (OFF)

! Sleep timer button (SLEEP)

" Setup button (SET)

# Clear button (CLR)

$ Memory and Preset button (PRESET)

% One Touch button (ONE-TOUCH)

& High power button (Hi-POWER)

( Economy button (ECO)

) Quiet button (QUIET)

~ Comfort sleep button (COMFORT SLEEP)

+ Plasma Air Puriﬁ er button (PURE)

(RAS-10, 13, 16SKVR-A Only)

, Filter reset button (FILTER)

- Clock Reset button (CLOCK)

. Check button (CHK)

ONE-TOUCH

Press the “ONE-TOUCH” button for fully automated operation that is customised

to the typical consumer preferences in your region of the world. The customised

settings control temperature air ﬂ ow strength, air ﬂ ow direction and other settings

to provide you alternate contact with “ONE-TOUCH” of the button. If you prefer

other settings you can select from the many other operating functions of your

Toshiba unit.

Press

ONE-TOUCH

: Start the operation.

AUTOMATIC OPERATION

To automatically select cooling, heating, or fan only operation

1. Press

MODE

: Select A.

2. Press

TEMP

: Set the desired temperature.

COOLING / HEATING / FAN ONLY OPERATION

1. Press

MODE

: Select Cool , Heat , or Fan only .

2. Press

TEMP

: Set the desired temperature.

Cooling: Min. 17

C, Heating: Max. 30

C, Fan Only: No temperature indication

3. Press

FAN

: Select AUTO, LOW , LOW+ , MED , MED+ , or

HIGH .

DRY OPERATION

For dehumidiﬁ cation, a moderate cooling performance is controlled

automatically.

1. Press

MODE

: Select Dry .

2. Press

TEMP

: Set the desired temperature.

AIR PURIFYING OPERATION

(RAS-10, 13, 16SKVR-A Only)

During air conditioner operation

Press

PURE

to start and stop plasma air puriﬁ er and air ionizer operation.

The plasma air puriﬁ er and air ionizer can be activated or deactivated during air

conditioner is stopped and the air ionizer starts in conjunction with plasma air

puriﬁ er operation.

Note: The FILTER indicator (orange) turns on after PURE operation is performed

for about 1000 hours.

Hi-POWER OPERATION

To automatically control room temperature and airﬂ ow for faster cooling or heating

operation (except in DRY and FAN ONLY mode)

Press

Hi-POWER

: Start and stop the operation.

ECO OPERATION

To automatically control room to save energy (except in DRY and FAN ONLY

mode)

Press

ECO

: Start and stop the operation.

Note: Cooling operation; the set temperature will increase automatically 1 degree/

hour for 2 hours (maximum 2 degrees increase). For heating operation the

set temperature will decrease.

CLEANING

RESET TIMER OPERATION

32 1

1 OPERATION (Green)

2 TIMER/CLEANING (Yellow)

3 RESET button

Models: RAS-10, 13, 16SKVR-A, RAS-13, 16SKV-A

Models: RAS-10SKV-A

1110250102-(1).indd 21110250102-(1).indd 2 1/4/07 4:48:03 PM1/4/07 4:48:03 PM

Toshiba RAS-10SAV Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info