Bedienungsanleitung Toshiba RAS-13UKP-E (Seite 11 von 32) (Englisch)

497476

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

TOSHIBA RAS-07/10/13UKP (US) 1075000802

4 EN

REMOTE CONTROL AND ITS FUNCTIONS

$ Memory button (MEMO)

Press this button to stand by memorizing the

settings.

Press the button again for more than 3 seconds to

memorize the setting indicated on the remote

control and mark is indicated. ( see page 12.)

% Automatic operation button (AUTO)

Press this button to operate the air conditioner

automatically.

(A receiving beep is heard.) ( see page 15.)

& ECO timer button (ECO)

Press this button to start the ECO timer (OFF

timer) operation.

You can select the OFF timer time from among

four settings (1,3,5 or 9 hours). (

see page 15.)

((

( FILTER button

Press this button to turn off the filter cleaning lamp

on the indoor unit.

Press this button after cleaning the air filter.

(

see page 17.)

))

) PRESET button

Press this button to operate the air conditioner

according to settings memorized by the MEMO

button. (

see page 12.)

~ TIMER button

Use this button to change the clock, ON timer, and

OFF timer times.

To forward the time, press the “TIMER

” button.

To set back the time, press the “TIMER

” button.

1 Infrared signal emitter

Transmits a signal to the indoor unit.

2 START/STOP button

Press the button to start operation.

(A receiving beep is heard.)

Press the button again to stop operation.

(A receiving beep is heard.)

If no receiving sound is heard from the indoor unit,

press the button twice.

3 Mode select button (MODE)

Press this button to select a mode.

Each time you press the button, a mode is

selected in a sequence that goes from A : Auto

changeover control,

: Cool, : Dry,

: Fan only, and back to A.

(A receiving beep is heard.)

4 Temperature button ( )

....... The set temperature is increased up to 30 °C.

....... The set temperature is dropped down to 17 °C.

(A receiving beep is heard.)

5 Fan speed button (FAN)

Press this button to select fan speed. When you

select AUTO, the fan speed is automatically

adjusted according to the room temperature.

You can also manually select the desired fan

speed from among five settings.

(LOW

, LOW

, MED ,

MED

, HIGH )

(A receiving beep is heard.)

6 Auto louver button (SWING)

Press this button to swing the louver.

(A receiving beep is heard.)

Press the FIX button to stop the louver swinging.

(A receiving beep is heard.) (

see page 13.)

7 Set louver button (FIX)

Press this button to adjust the air flow direction.

(A receiving beep is heard.) (

see page 13.)

8 Off timer button (OFF)

Press this button to set the OFF timer.

9 On timer button (ON)

Press this button to set the ON timer.

! Reserve button (SET)

Press this button to reserve time settings.

(A receiving beep is heard.)

" Cancel button (CLR)

Press this button to cancel ON timer and OFF

timer. (A receiving beep is heard.)

# High power button (Hi POWER)

Press this button to start the high power opera-

tion. (

see page 15.)

PRESET

FAN MODE

Hi-POWER

OFF SET CLR

ECO

AUTO

TIMER

CLOCK CHECKRESET

FILTER

FIX

SWING

MEMO

START/STOP

AUTOA

01RAS-07/10/13UKP P03-05 2/1/02, 12:01 AM4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba RAS-13UKP-E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info