Bedienungsanleitung Toshiba RAS-22LAV-UL (Seite 4 von 12) (Englisch, Französisch, Spanisch)

497465

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

PRESET OPERATION

AUTO RESTART OPERATION

To operate at super low fan speed for quiet operation (except in DRY mode)

Press

QUIET

: Start and stop the operation.

Note: Under certain conditions, QUIET operation may not provide adequate

cooling or heating due to low sound features.

For comfortable sleep, automatically control air ﬂ ow and automatically turn

OFF.

Press

COMFORT

SLEEP

: Select 1, 3, 5 or 9 hrs for OFF timer operation.

Note: The cooling operation, the set temperature will increase automatically

2°F (1°C)/hour for 2 hours (maximum 4°F (2°C) increase). For heating

operation, the set temperature will decrease.

COMFORT SLEEP OPERATION

To start the sleep timer (OFF timer) operation

Press

SLEEP

: Select 1, 3, 5 or 9 hrs for OFF timer operation.

SLEEP TIMER OPERATION

Firstly, turn off the circuit breaker.

Filter Reset

FILTER lamp lights on; the ﬁ lter must be cleaned.

To turn off the lamp, push the RESET button on the indoor unit or the FILTER

button on the remote control.

Indoor Unit and Remote Control

• Clean the indoor unit and the remote control with a wet cloth when

needed.

• No benzine, thinner, polishing powder or chemically-treated duster.

MAINTENANCE

QUIET OPERATION

To automatically restart the air conditioner after the power failure (Power of

the unit must be on.)

Setting

1. Press and hold the RESET button on the indoor unit for 3 seconds to

cancel the operation. (3 beep sound but OPERATION lamp does not

blink)

2. Press and hold the RESET button on the indoor unit for 3 seconds to set

the operation. (3 beep sound and OPERATION lamp blink 5 time/sec for

5 seconds)

• Do not operate ON timer and OFF timer.

Note: Default setting of auto restart operation is on.

Set your preferred operation for future use. The setting will be memorized by

the unit for future operation (except airﬂ ow direction).

1. Select your preferred operation.

2. Press and hold

PRESET

for 3 seconds to memorize the setting.

The P mark displays.

3. Press

PRESET

: Operate the preset operation.

The unit does not operate.

Cooling or Heating is abnormally

low.

• The power main switch is turned

off.

• The circuit breaker is activated to

cut off the power supply.

• Stoppage of electric current.

• ON timer is set.

• The ﬁ lters are blocked with dust.

• The temperature has been set

improperly.

• The windows or doors are

opened.

• The air inlet or outlet of the

outdoor unit is blocked.

• The fan speed is too low.

• The operation mode is FAN or

DRY.

SELF CLEANING OPERATION

(COOL AND DRY OPERATION ONLY)

To protect bad smell caused by the humidity in the indoor unit.

1. If the

button is pressed once during “Cool” or “Dry” mode, the fan will

continue to run for other 30 minutes, then it will turn off automatically.

This will reduce the moisture in the indoor unit.

2. To stop the unit immediately, press the

more 2 times within 30

seconds.

TROUBLESHOOTING (CHECK POINT)

TEMPORARY OPERATION

TIMER OPERATION

Daily timer allows the user to set both the ON & OFF timers and will be

activated on a daily basis.

Setting Daily Timer

Setting the ON Timer Setting the OFF Timer

Press

: Set the desired

ON timer.

Press

OFF

: Set the desired

OFF timer.

Press

SET

: Set the timer. Press

SET

: Set the timer.

Press

CLR

: Cancel the timer. Press

CLR

: Cancel the timer.

• During the every day timer is activating, both arrows ( , ) are indicated.

Note:

• Keep the remote control in accessible transmission to the indoor unit;

otherwise, the time lag of up to 15 minutes will occur.

• The setting will be saved for the next same operation.

Press

: Set the ON

timer.

Press

SET

Press

OFF

: Set the OFF

timer.

Press

SET

button during

the ( or ) mark ﬂ ashing.

Set the timer when the air conditioner is operating.

In case of the misplaced or discharged remote control

• Pressing the RESET button, the unit can start or

stop without using the remote control.

• Operation mode is set on AUTOMATIC operation,

preset temperature is 77°F (25°C) and fan

operation is automatic speed.

COOLING / HEATING / FAN ONLY OPERATION

DRY OPERATION

For dehumidiﬁ cation, a moderate cooling performance is controlled

automatically.

1. Press

MODE

: Select Dry .

2. Press

TEMP

: Set the desired temperature.

1. Press

MODE

: Select Cool , Heat , or Fan only .

2. Press

TEMP

: Set the desired temperature.

Cooling: Min. 62°F (17°C), Heating: Max. 86°F (30°C), Fan Only:

No temperature indication

3. Press

FAN

: Select AUTO, LOW , LOW+ , MED ,

MED+ , or HIGH .

Hi-POWER OPERATION

ECO OPERATION

To automatically control room to save energy (except in DRY and FAN ONLY mode)

Press

ECO

: Start and stop the operation.

Note: Cooling operation; the set temperature will increase automatically 2°F

(1°C)/hour for 2 hours (maximum 4°F (2°C) increase). For heating

operation the set temperature will decrease.

To automatically control room temperature and airﬂ ow for faster cooling or

heating operation (except in DRY and FAN ONLY mode)

Press

Hi-POWER

: Start and stop the operation.

1110650133-1-EN.indd 41110650133-1-EN.indd 4 1/4/10 3:50:59 PM1/4/10 3:50:59 PM

Toshiba RAS-22LAV-UL Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info