Bedienungsanleitung Toshiba RD-XS32SU (Seite 21 von 179) (Englisch)

462435

Zoom out

Zoom in

Vorherige Seite

1/179

Nächste Seite

Recording

Playback

Editing

Library

Function setup

Others

Introduction

DVD-RAM disc with cartridge (TYPE1/TYPE2/TYPE4)

Single sided

Turn the printed side up, and insert the cartridge

into the tray frame following the direction of the

arrow on the cartridge.

Double sided

Turn the desired recording/playback side up, and

insert the cartridge into the tray frame following the

direction of the arrow on the cartridge.

3 Close the disc tray.

Press

on the front panel or the OPEN/CLOSE

button on the remote control.

Notes

• Use the button on the front panel or the remote control to

open and close the disc tray. Do not push or hold the disc

tray while it is moving. Doing so may cause the recorder to

malfunction.

• Do not insert a disc which is unplayable, or any object

other than a playable disc.

• Do not apply downforce to the disc tray. Doing so may

cause the recorder to malfunction.

• If the disc tray stops while closing, the mechanical

protection system of this recorder will open it. Do not force

it to close. Doing so may cause malfunction.

• If the disc tray will not open, turn the recorder off, and

press the button on the front panel or the OPEN/

CLOSE button on the remote control. This may turn the

recorder on and open the disc tray. If it still won’t open,

contact your nearest TOSHIBA dealer.

Turning the power off

Press ON/STANDBY on the front panel of the

recorder or on the remote control.

The “Unloading” icon appears at the top right corner of

the screen, and the ON/STANDBY indicator turns red,

then the power turns off (Standby mode.)

Caution

• If the power fails or the power cord is disconnected from a

wall outlet while the recorder is in operation (ON/STANDBY

indicator lit in green), the HDD or a loaded disc may

become recording disabled. In such a case, executing an

initialization of the disc using the formatting function of the

recorder may refresh it. However, all contents stored on the

disc will be completely erased by this initialization process.

• This recorder may indicate alert messages with some

DVD-RAM discs right after insertion. If such a disc is used

for playback or recording on other equipment, all data in

the disc may be damaged and the disc will not be played.

By executing an initialization of the disc using the

formatting function of the recorder, the disc will become

operational.

• If the recorder freezes and does not respond at all, leave it

alone for about 15 minutes or longer. This may restore the

recorder. After the recorder has recovered, turn it off once

and turn it on again to use as usual. If the recorder is still

inoperable after more than 15 minutes have passed, press

and hold the ON/STANDBY button on the front panel or the

remote control for about 10 seconds or longer. The

recorder is forced to quit and the power turns off. Turn the

recorder on again and use it as usual. (This is an

emergency measure, which may cause losses and/or

damages of data. Avoid casual use of this measure. If you

try this while the recorder is working properly, especially

while the “Loading” or “Unloading” icon is flashing, it may

result in initializing of the HDD.) (This 15-minute measure

is available only when “Screen protector” is set to “On.”

( page 159))

Note

• If there are any performance malfunctions of the HDD or

the DVD-RAM drive, immediately discontinue use of this

recorder, and disconnect the power cord from a wall outlet,

then contact your dealer. Continuous use of the recorder in

such a condition will aggravate the condition and result in

increased cost and repair time.

Disc tray lock

You can lock the disc tray.

Press and hold

on the front panel or PAUSE on

the remote control for longer than about 3

seconds.

To unlock, during stop press the button for longer than

about 3 seconds.

Note

• Turning the power off also unlocks the disc tray.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba RD-XS32SU Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info