462435
28
Zoom out
Zoom in
Vorherige Seite
1/179
Nächste Seite
28
How to initialize a disc
To initialize a DVD-RAM disc, load it in the recorder.
See
page 20 for loading a disc.
1) During stop, press QUICK MENU.
The following menu appears. (The actual contents
depends on the operational status of the recorder.)
2) Press
/ to select Disc management, then
press ENTER.
A sub menu appears on the right side.
3) Press
/ to select DVD format, then press
ENTER.
Numbering a disc
The recorder automatically numbers discs when
initializing. However, you can assign a desired number
(using 3 digits) and designate sides A and B on a double-
sided disc. (DVD-RW discs cannot be numbered.)
(1) Press the
/ buttons to select Edit of Disc
Number then press the ENTER button.
(2) Press the
/ buttons to select a digit.
(3) Press the
/ buttons to shift.
(4) Repeat steps (2) and (3).
(5) Press the ENTER button.
Naming a disc
You can name a disc.
(1) Press the
/ buttons to select Edit of Disc
Name, then press the ENTER button.
The character input window appears.
(2) Enter a disc name following the procedure of
Entering characters (
page 30).
(3) Press the
button to eliminate the window.
Before recording (Continued)
Recording
Be sure to read this section prior to using a DVD-RAM/RW disc on this recorder for the first time.
For DVD-R, initializing is not necessary.
Initializing a DVD-RAM/RW disc (Logical Format)
A disc should be initialized in the following cases: (The
recorder may display a message to request you to do
so.)
e.g.
When you use a DVD-RAM/RW disc on this recorder
for the first time.
If data fragments produced by repeated recording or
erasing have accumulated.
If a disc error has occurred.
When you want to record on a DVD-RAM disc for PC.
(
page 8)
Initializing formats a disc logically and insures that it will
perform to its full capability. However, this erases all data
on the disc, so make sure that it does not matter if data
on the disc is erased whenever you initialize a disc.
Quick Menu
Bit rate
Special playback mode
Disc management
DVD compatible mode
Aspect ratio(Video mode)
DVD-Video:CHP create
AV record quality
SAP
Exit
e.g.
Quick Menu
Bit rate
Special playback mode
Disc management
DVD compatible mode
Aspect ratio(Video mode)
DVD-Video:CHP create
AV record quality
SAP
Exit
Disc information
DVD format
e.g.
%
0
DVD format
0 0 1
Disc Number
Disc Name
Start Cancel
Edit
Edit
Format
e.g.
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Toshiba RD-XS32SU wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info