1-31
Operation with DVD and Video CD
Playing a DVD and Video CD
Playback Setup
zTurn on the TV and select the video input source
connected to the DVD player.
zAudio system: Turn on the audio system
and select the input source connected to the
DVD player.
11
Press OPEN/CLOSE 00to open the disc tray.
22
Load your chosen disc in the tray, with the play-
back side down.
33
Press OPEN/CLOSE 00to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY N.
In some cases, the disc menu might appear
instead.
44
To stop the playback, press STOP x.
Then press OPEN/CLOSE 00.
The disc tray opens.
Remove the disc and press OPEN/CLOSE 00then
press ++//11.
The disc tray closes automatically and unit turns off.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which offer a menu.
Use the b B v V buttons to select the title/chapter you
want to view, then press ENTER/OK to start
playback.
Press TOP MENU or MENU to return to the menu
screen.
zzUse the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
zzMenu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on each menu screen.
You also may set PBC to Off under setup. See page
20.
Notes
OIf Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 21).
ODVDs may have a region code.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 2 (two).
General Features
Note
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
Moving to another TITLE
When a disc has more than one title, you can move to
another title as follows:
zzPress DISPLAY, then press the appropriate
numbered button (0-9) to select a title number.
Moving to another CHAPTER/TRACK
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
zPress SKIP >or .briefly during playback to
select the next chapter/track or to return to the
beginning of the current chapter/track.
zzPress SKIP .twice briefly to step back to the
previous chapter/track.
zzTo go directly to any chapter during DVD playback,
press DISPLAY. Then, press 33/44to select
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
Note
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.
Search
1Press REW m or FWD Mduring playback.
The player will now go into SEARCH mode.
2Press REW mor FWD Mrepeatedly to select the
required speed:
mX2, mX4, mX16, mX100 (backward) or
MX2, MX4, MX16, MX100 (forward).
With a Video CD, the Search speed changes:
mX2, mX4, mX8 (backward) or MX2, MX4,
MX8 (forward).
3To return to playback, press PLAY N.
Still Picture and Frame-by-Frame Playback
1Press PAUSE/STEP
X/C
during playback.
The player will now go into PAUSE mode.
2You can advance the picture frame-by-frame by
pressing PAUSE/STEP
X/C
repeatedly on the remote
control.
3To return to playback, press PLAY N.
VCD1.1VCD2.0
DVD
VCD1.1VCD2.0
DVD
