Bedienungsanleitung Toshiba SD-510EB (Seite 70 von 72) (Englisch)

41322

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Others

Before Calling Service Personnel

Check the following guide for the possible cause of a problem before contacting service.

Symptoms and correction

Symptom

No power.

The DVD player turned off by

itself.

No picture.

No sound.

The playback picture has

occasional distortion.

Brightness is unstable or

noises are present in the

playback pictures.

The DVD player does not

start playback.

Playback does not follow the

course of the disc’s program.

Buttons do not work.

The remote control does not

work properly.

Cause

• The power plug is disconnected.

• The automatic power off function turned

the unit off.

• The TV is not set to receive DVD signal

output.

• The video cable is not connected securely.

• The equipment connected with the audio

cable is not set to receive DVD signal

output.

• The audio cable is not connected securely.

• The audio receiver or TV is turned off.

• The setting of output sound format is

incorrect.

• The disc is dirty.

• It is in fast forward or fast reverse

playback.

• The effect of copy protection.

• No disc is inserted.

• An unplayable disc is inserted.

• The disc is placed upside down.

• The disc is not placed within the guide.

• The disc is dirty.

• The parental lock function is set.

• It is in the mode of repeat playback,

memory playback, etc.

• Power supply fluctuations or other

abnormalities such as static electricity may

interrupt correct operations.

• The remote control is not pointed at the

remote sensor of the DVD player.

• The remote control is too far from the DVD

player.

• The batteries in the remote control are

exhausted.

Correction

• Connect the power plug securely into the

wall outlet.

• Press the PLAY button.

• Select the appropriate video input mode

on the TV so the picture from the DVD

player appears on the TV screen.

• Connect the video cable securely into the

appropriate jacks.

• Select the correct input mode of the

audio receiver so you can listen to the

sound from the DVD player.

• Connect the audio cable securely into

the appropriate jacks.

• Turn on the equipment connected with

the audio cable.

• Select the proper audio setting.

• Eject the disc and clean it.

• Sometimes a small amount of picture

distortion may appear. This is not a

malfunction.

• Connect the DVD player directly to the

TV. Avoid connecting the DVD player to

a VTR or TV/VTR combination.

• Insert a disc.

• Insert a playable disc. (Check the disc

type.)

• Place the disc with the playback side

down.

• Place the disc correctly inside the guide

on the disc tray.

• Clean the disc.

• Cancel the parental lock function or

change the parental lock level.

• These operations may prevent a proper

progress of the contents.

•

Turn the power on or off with the ON/

STANDBY button. Or disconnect the power

plug and insert it into the wall outlet again.

• Point the remote control at the remote

sensor of the DVD player.

• Operate the remote control within about

7 m.

• Replace the batteries with new ones.

Page

18-20

18-24

42, 56

–

56, 65

–

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba SD-510EB Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info