Bedienungsanleitung Toshiba SDKV550 (Seite 37 von 72) (Englisch)

35450

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Recording (VCR)

Timer recording

Timer recording can be programmed on-screen with the remote control.

The built-in timer allows automatic unattended recording of up to 8

programs within 1 month.

Timer recording

Notes:

• Press CANCEL to move cursor backward for correction.

• To record from external source set the channel to “L1” or

“L2”.

Notes:

• If the timer symbol ( ) blinks when the timer recording ended,

the TV program has not been completely recorded because of

an insufficient tape length. Press TIMER REC to cancel the

timer program or press EJECT to remove the cassette tape.

• During timer recording standby mode, the VCR mode cannot be

operated. To use the VCR, first press TIMER REC, then press

VCR DVD selector to change to VCR mode. After VCR mode is

selected, press TIMER REC again to put the VCR into timer

recording standby mode.

• If you press TIMER REC during timer recording, the recording

operation will be interrupted. If you press TIMER REC again

within the programmed time, the recording operation will start

again.

• After a power failure or disconnection of the power plug, all

programmed recording settings and time display will be lost

upon resumption of power. In this case, reset the clock

and

reprogram any timer recording.

Press VCR MENU. Select “TIMER REC SET”,

then press ENTER.

Preparation:

• Press VCR DVD selector to select the VCR mode.

• Load a cassette tape with the erase prevention tab

intact.

• Check the time and date are correct

Example: Program a timer recording for the 26th day,

channel 125

(Cable TV), 11:00 - 11:30 PM on timer program

number 1 (Tape speed: SLP).

Press SET + or – to select one of the program

line, then press ENTER.

Press SET + or – to select the date, then press

ENTER.

Set the start time, end time, channel and tape

speed as in step 3.

〈+/—/ENTER/CANCEL/MENU

〉

DATE START END CH

———————:—— —:—— ———

—

26(SA)

:00

:30

125

SLP

〈+/—/ENTER/CANCEL/MENU

〉

DATE START END CH

———————:—— —:—— ———

—

26(SA)

:00

:30

125

SLP

To enter other programs, repeat step 2

through 4.

• To return to the normal screen,

press VCR MENU twice.

Press TIMER REC. The timer symbol ( ) will

appear on the display and the VCR standbys

for recording.

At the same time, VCR mode will

change to DVD mode automatically.

You can use DVD even if the VCR is

in the timer recording mode. If you

do not use the DVD, turn the power

off.

Notes:

• The timer recording will start at 5 seconds before the

preset starting time.

• If the timer symbol ( ) does not appear on the display

when TIMER REC is pressed, the cassette is not inserted

• If the cassette is ejected when TIMER REC is pressed, the

erase prevention tab of the cassette may have been

removed

SET +/–

VCR DVD

ENTER

CANCEL

VCR MENU

EJECT

〈 〉

〈+/

—

/ENTER/CANCEL/MENU

〉

DATE START END CH

———————:—— —:—— ———

—:—— —:—— ———

———————:—— —:—— ———

—

26(SA)

TIMER REC

2I30201B-En_p32-37 1/13/06, 2:48 PM37

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba SDKV550 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info