Bedienungsanleitung Toshiba TD-Z471 (Seite 62 von 76) (Englisch)

562486

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

How to Use

Mode Description

TILING

H MONITORS: Select the number of images obtained by horizontal division.

V MONITORS: Select the number of images obtained by vertical division.

POSITION: Select the area you want to enlarge.

FRAME COMP.:

When displaying an image across multiple monitors, you can select the

mode to compensate for the bezel widths for smooth and natural display.

ENABLE: When you select ON, the image in the selected area is enlarged on the screen.

HEAT STATUS

The statuses of the cooling fan, brightness, and internal temperature are displayed.

The cooling fan starts running according to the operating temperature or when

COOLING FAN is ON in the SCREEN SAVER menu. When the operating temperature

substantially exceeds the operation guaranteed range, the message “TEMPERATURE

WARNING” is displayed on the screen.

POWER ON DELAY

You can adjust the delayed time until the power-on mode is activated at the time of recovery

from the sleep mode or power-on.

The time is selectable from OFF and 2, 4, 6, 8, 10, 20, 30, 40, and 50 seconds.

TERMINAL SETTING

You can select the mode to display the HDMI1, HDMI2, or DVI-D signal according to their

signal format depending on their source device.

HDMI SIGNAL:

Select this setting when displaying HDMI1, HDMI2, or OPTION (when

an OPS-compliant computer is mounted).

Select FULL when displaying the signal that uses all 256 levels (from level

0 to 255). This mode is used primarily when input comes from a computer.

Select LIMITED when displaying the signal that uses 16 to 235 levels of

256 levels for each of R, G, and B. This mode is used primarily when input

comes from a video device.

HDMI MODE:

Select this setting when displaying the HDMI1 or HDMI2 signal.

Select HDMI-HD when the source device is a video device.

Select HDMI-PC when the source device is a PC.

DVI MODE:

Select this setting when displaying the DVI-D signal.

Select DVI-PC when the source device is a PC.

Select DVI-HD when the source device is a video device.

CLOSED CAPTION

You can select to display or hide captions.

OFF: Captions are hidden.

CC1: Captions are displayed in sync with the primary audio.

CC2: Information (related to the primary audio) is displayed without sync.

CC3: Captions are displayed in sync with the secondary audio.

CC4: Information (related to the secondary audio) is displayed without sync.

TT1/TT2/TT3/TT4:

Four types of information not related to the displayed images are

displayed. (For example, news and weather forecast.)

Check with each supplier of your video software and external video devices in advance

whether they are compliant with EIA-608-A.

If their video signals are not compliant with it, images may not be displayed correctly.

USB UPSTREAM

You can select either of the 2 upstream ports and distribute the signal to 2 downstream ports.

EXTERNAL: External computer is selected.

OPS: OPS-compliant computer is selected.

ADVANCED OPTION

RESET

The settings made in the ADVANCED OPTION menus are reset to the factory defaults.

However, HDMI MODE, DVI MODE, and DDC/CI aren’t reset.

Advanced Option

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TD-Z471 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info