Bedienungsanleitung Toshiba TDP-MT500 (Seite 30 von 42) (Englisch)

485546

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

INSTALLATION MENU

ITEM SETTING FUNCTION

LANGUAGE --------- -5言語 ------------ Selects a language used for displays on the screen, such as

menus. Adjusts computer video images.

RGB & COMPONENT ---------------- Adjusts computer video images.

AUTO * --------------------------------------- Selecting Auto and pressing ENTER button automatically

adjust position and size of the projected images in

accordance with the image signals from the computer.

FREQUENCY *−15∼＋15-------- If any wide streak pattern appears on the projected images, it

can be adjusted with this setting while viewing the images.

PHASE *------------ 0 ∼ 31 ----------- If any flicker or blur appears on the projected images, it can be

adjusted with this setting while viewing the images.

H.POS * --------- −30 ∼ +30 ------- Moves display position of projected images in horizontal

direction.

V. POS * --------- −30 ∼ +30-------- Moves display position of projected images in vertical direction.

MIRROR ------ FLOOR FRONT ----- Select this setting with the projector set on the floor when

viewing the projected images from the front side.Normally,

select this setting.

---------- CEILING FRONT ---- Select this setting with the projector suspended from the

ceiling when viewing the projected images from the front side.

------------ FLOOR REAR ------ Select this setting with the projector set on the floor when

viewing the projected images from the rear side of the screen.

----------- CEILING REAR ----- Select this setting with the projector suspended from the

ceiling when viewing the projected images from the rear side

of the screen.

KEYSTONE --- −12∼＋12 -------- Select this setting when correcting trapezoidal distortion.

Normally, select “0”.

PATTERN ----------------------------------- Pressing ENTER button reveals the test pattern for focus

adjustment.

• The items with * mark function only for 1080i, 720p, 525p, and 625p input signals and input signals from DVI terminal.

• The varying range of the vertical position depends on the type of the input signal. With some values the vertical position may not

change, but this is not a failure.

• With the inputs from DVI-DIGITAL terminal, no change appear on the projected images with adjustment of the dividing ratio and

fine, but this is not a failure.

• Without input signals, only some of the above items can be changed.

INSTALLATION...

RGB & COMPONENT

MIRROR

KEYSTONE

PATTERN

LANGUAGE

RGB & COMPONENT

INSTALLATION...

FREQUENTCY

AUTO YES?

PHASE

H. POS

V. POS

DIASPLAY MENU

On the memory for projected image quality

This projector allows each item in the picture quality setting menu and the professional-use picture quality

setting menu (except for color temperature use-adjustment) to be adjusted to up to three kinds of favorable

picture quality for each input signal.

Input that allows the setting Number of settings

VIDEO 3

S-VIDEO 3

COMPONENT 1, 2 3

DVI-ANALOG/DIGITAL 3

To store the settings:

(Refer to Page 25 for how to set menus.)

1. Set an item in the picture quality setting menu and the professional-use picture quality setting menu.

2. Reveal the signal setting menu.

3. Select “Store the setting “ by pressing {, } buttons.

4. Press ENTER button.

The setting storage menu appears.

5. Select the memory where the setting is to be stored by pressing {, } buttons.

6. Press ENTER button.

The setting is stored in the memory.

To cancel the menus:

7. Press MENU button.

To apply the set picture quality:

1. Press MEMORY1, 2, or 3 button.

The picture quality of the projected image comes to the set quality.

INSTALLATION...

MEMORY 2

MEMORY 3

MEMORY 1

SAVE

SETTING WITH MENUS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TDP-MT500 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info