Bedienungsanleitung Toshiba TDP-SW20 (Seite 21 von 37) (Englisch)

485607

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Operations

• Subnet mask

A subnet mask is used to determine what subnet the IP address assigned to a

terminal belongs to. (Example: 255.255.xxx.xxx)

• Gateway

This value specifies the device, such as a router, to be used to access servers outside

the network. It is identified by the IP address. (Example: 111.112.xxx.xxx)

• [Initialize]

This item resets the wireless LAN settings to their factory defaults.

• [Projector name]

This can be used to identify projectors when communicating with multiple projectors, or

if there is a possibility that another person who is out of communication range will be

using the same projector. It is recommended this is set to prevent wrong transmission.

• [Miscellaneous]

This item is expanded into the following items:

DescriptionItem

Remote

control

Browser

authentication

Password

Status

report

SMTP server

Destination

address

Select whether this projector is to be remote-controlled by the

computer.

Enable Presentation Disable

Enable : Always accepts remote commands from the

computer.

Presentation : Accepts remote commands only from the computer,

the screen of which is currently being displayed via

the projector by the Wireless Utility (Update

automatically).

Disable : Always ignores remote commands from the computer.

Enable or disable password authentication for access to the setting

menu of the Projector Configuration Tool. On Off

Set the password to be made valid for access to the setting menu

when [Browser authentication] is set to [On]. Specify a string of

arbitrary characters (1 to 8 characters).

[ : Enter the setting mode] [ : Move from digit to digit] [

to : Enter the string] [Accept: ]

Select whether to automatically send error information to a specified

e-mail address if an error occurs, for example, when the lamp has

blown. On Off

Set the IP address of the SMTP server.

[ : Enter the setting mode] [ : Move from digit to digit] [

to : Enter the string] [Accept: ]

Set the e-mail address of the recipient of the status report, within 60

characters. (xxx@xxx.xxx)

[ : Enter the setting mode] [ : Move from digit to digit] [

to : Enter the string] [Accept: ]

PRECAUTIONS

• Browser authentication and Password are factory-set to Off and no string,

respectively. You should set them as soon as possible.

• If you have forgotten your password, set it again using the menu on the main unit.

Setting up the wireless LAN (Continued)

■ Computer settings

Refer to instruction manuals of your computer or wireless LAN PC card to perform the

following settings.

• Select Ad-Hoc (for some PC cards, this is Peer-to-Peer Group).

• Set the Channel to channel assigned to the projector (in factory reset mode, this is set to

10). (for some computers, you cannot set the channel in Ad-Hoc mode. For this case, use

infrastructure communication mode.)

• Set SSID (for some types of PC card, use Network Name instead) as the same as

projector’s SSID (at factory shipment, this is set to DPJ).

• If Encryption and Key are set on the projector, set to the same values.

Note: It is imperative that the projector and computer encryption settings are the same.

If the settings are different, the encryption may be invalid when sending in the Ad

HOC communication mode, so be careful.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TDP-SW20 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info