Bedienungsanleitung Toshiba tdp tw100 (Seite 13 von 46) (Englisch)

214536

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Operations

Notes

• The start-up screen will disappear after a moment. You can dismiss the start-up screen

before this by performing any operation. You can also configure the start-up screen not to

appear via the Display setting menu

p.38

• The first time you use the projector after purchase, after the start-up screen disappears,

the start menu is displayed

p.26

• When [Key lock] is [On], the operation buttons of the projector do not work

p.43

• When [Password] is [On], enter password then the start-up screen is displayed after the

Password entry screen disappears

p.33

■ Turning the power off

Press the ON/STANDBY button.

A message appears on the screen, confirming that you wish to shut off the power. This

message will disappear after a moment. (This operation is no longer valid after the

message disappears.)

Press the ON/STANDBY button again.

The screen turns off, but the internal cooling fan continues to operate for a short while.

Then, the projector goes into standby mode.

A B C

During cooling, the LAMP indicator flashes. In this state, the power cannot be

turned back on.

If you are in a hurry, there is no problem with unplugging the power cord in this

state.

After the LAMP indicator goes off, the FAN indicator keeps lighted and the

cooling fan continues to operate for a short while, in order to expel excess

internal heat.

In standby mode

Note

• The projector consumes about 9W of power in standby. We recommend that you unplug

the power cord if you will not be using the projector for an extended period.

(When [Wireless standby] is [On], it consumes about 12W during standby.)

PRECAUTION

• If the power cord is unplugged before cooling is complete, give the lamp time (about 5

minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light.

When cooling lamp During internal cooling After cooling complete

Turning the power on and off

Operations

■ Connecting the power cord

Insert the power cord connector into

the AC IN socket of the projector.

Insert the power cord plug into a

wall or other power outlet.

The ON/STANDBY indicator will

change to orange, indicating standby

mode.

■ Removing the lens cover

Be sure to remove the lens cover when the power is

turned on. If it is left on, it could become deformed due

to heat.

■ Turning the power on

Press the ON/STANDBY

button.

The power turns on, and the following

3 green indicators light: ON/STANDBY,

LAMP, and FAN. After a moment, the

start-up screen appears.

CAUTION

• Do not look into the lens while the lamp is on. The strong light from the lamp may cause

damage to your eyes or sight.

• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheat-

ing.

• Do not place your hands, face, or other objects near the air exhaust. Doing so could cause

burns, deform/break the object.

Power cord connector

(Supplied)

Start-up screen

Control panel

Remote

Control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tdp tw100 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info