Bedienungsanleitung Toshiba tdp tw100 (Seite 21 von 46) (Englisch)

214536

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Operations

■ The default setting menu

This menu shows placement status and other settings.

Description

Item

(Rear

ceiling)

(Standard)

(Rear) (Ceiling)

On Off

Standard High

Yes No

Off On

Low Standard

Sets projection mode in accordance with Placement Style.

Set the time to wait for the power to be turned off after the last

operation is made with no input signal.

Off (not turned off) 30 min.

Set whether the input with signals is only selected or not.

Sets whether to turn on the power when the ON/STANDBY button is pressed

(Manual), or when the power cord is plugged in (Auto).

Manual Auto

Set the items of Easy setup and power ON/OFF.

[ or : Enter setting mode] [ : Select item] [On Off]

Auto focus

Auto v-keystone

Auto-setting

Power on Easy setup

Sets the lamp power.

Sets the cooling fan speed.

Switch on/off the wireless LAN while the projector is in standby.

When two or more projectors are used and controlled by the remote

control respectively, this menu sets the code for the projector and the

remote control.

[ or : Enter setting mode] [ : Select item] [ :

Select from 1, 2, 3, 4] [ :Confirm] [ :Select OK to end]

Press [Cancel] to return.

Lock the control panel buttons.

[ or : Enter setting mode] [ : Select item] [ :

Select On/Off] [ :Confirm] [ :Select OK to end]

Press [Cancel] to return.

Press . (The password and user logo are not reset.)

Resets all adjustments and settings to their factory settings.

Password function

When [Password] is [On], the Password Setting screen is displayed.

Projection

mode

No signal

power off

Auto input

Power on

Easy setup

Lamp power

Fan mode

Wireless standby

Remote control

Key lock

Reset all

Password

p.21

p.33

On Off

Using the menus (Continued)

Notes

•You can register a logo from computer input only.

• The area that can be registered is 512 × 384 dots at the center of the screen. To

• Only one logo can be registered. When a new image is registered, the old one is

erased.

• The time needed to register or display the image varies depending on the data size.

• If you use this function on commercial video software, broadcast or cable-

broadcasting except for the purpose of your private viewing and listening, it may

infringe the copyright protected by the copyright laws.

Select the size of the registered logo.

: Displays the registered image in original size at center of the screen.

: Displays the registered image by enlarging fully in the screen.

(As processed digitally, the image quality is degraded.)

Sets background color when [Center] is selected for the logo [Display style].

You can preview the registered logo.

You can reset the registered logo, display style and background to the factory

setting. (The logo set for the start-up screen and background is reset.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tdp tw100 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info