Bedienungsanleitung Toshiba tdp tw100 (Seite 39 von 46) (Englisch)

214536

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Operations

Setting up the projector using a Web browser

■ How to use the “Projector Configuration Tool”

The “Projector Configuration Tool” uses the Web server features of the projector to

set up the projector using a wireless LAN USB adapter.

When using the “Projector Configuration Tool”, set up the wireless LAN connecting

the projector and the computer.

See “Checking the projector status”

p.61

to display

information on the screen and write down the IP address.

Invoke Internet Explorer.

Internet Explorer Ver. 6.0 is recommended. Enable the Javascript functions.

* Toshiba does not guarantee the operation for later versions.

In the address bar, enter the IP address

“http://xxx.xxx.xxx.xxx/” recorded in step

above.

The Web browser will then display the following page.

Projector name

Projector ID

Note 1: To prevent access from third parties, the projector is restricted to permit access

only from the computer that has been set up for the TCP/IP to have the same

network address as the projector.

Note 2: If you use a proxy server, do not enable the proxy when accessing the above IP

address.

When the wireless LAN is set to use Ad hoc mode, use the WEB browser function

in the Easy Connect menu of Wireless Utility.

Note

•

This function can be enabled using the WEB Browser function in the Easy Connect menu

of Wireless Utility without specifying the URL into the browser s address bar.

■ Making a presentation with converted JPEG files

(1) Copy the folder created by the JPEG Conversion Tool, or its contents, onto a USB

memory.

(2) Use the step

in “Playing a slide show from a thumbnail list”

p.57

to display a

list of thumbnails.

(3) Follow the instructions in step

in “Playing a slide show from a thumbnail list”

p.57

to find the thumbnail of the first slide, Slide001.jpg, and move the orange

frame to it. (Select Slide001.jpg)

(4) Press the

button on the remote control. An enlarged view of the first slide

appears on the screen. This starts the presentation.

(5) To continue to the next slide, click on the remote control’s

button. To go back to

the previous slide, click on the

button.

■ Creating a screen capture and converting it into a JPEG file

This function saves the current computer screen as a JPEG file.

(1) In the Conversion Method field, select Creating screen

capture.

(2) In the File settings field, click on the Browse button for File

name after conversion.

The Save As dialog box appears.

(3) In the Save As dialog box:

(a) Specify the location in which to save the converted file;

(b) Enter a file name of up to 8 characters in the File Name

field; and

(4) (a) In the JPEG Conversion Tool window, click on the

Conversion button.

(b) A confirmation message appears. Click Yes.

The computer creates a screen capture, and

converts it into a JPEG file in the specified location.

When it is finished, a message appears to tell you

that a “JPEG file has been created”.

Note

•

The maximum resolution of JPEG files created with the JPEG Conversion Tool is 1,024 ×

768 pixels.

(1)(1)

(2)(2)

(4)-(a)(4)-(a)

(3)-(b) (3)-(c)

(3)-(a)

(4)-(b)(4)-(b)

How to use the JPEG Conversion Tool (Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tdp tw100 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info