Bedienungsanleitung Toshiba tdp tw300 (Seite 28 von 47) (Englisch)

214450

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Operations

Setting up the wireless LAN (Continued)

● Details on individual items

• [Easy Connect (USB)]

This feature allows users to easily connect the projector to a computer over wireless

networks, without making network settings via Wireless Utility.

• [Network settings]

<Mode>

Your projector is set to Ad hoc in the factory. Change the setting if you want to use the

projector in Infrastructure mode.

Usually, you do not have to set this item. If a network group having the same SSID

already exists in the projector’s coverage, the channel is changed automatically to the

channel of that network group.

Note 1: If a set channel is in bad connections for wireless connection, try the other

channels to avoid the effects of radio waves to select the one in possibly the

best communication conditions.

Note 2: To communicate in Ad hoc mode with a computer that cannot change the

channel, start up the projector before the computer.

<SSID>

This is an ID code for connecting to specific individuals over a wireless LAN. This may

also be called “Network group” or “Network name”. Please read the following carefully.

Note 1: The SSID is set to TDPJ when shipped from the factory. If you leave this setting

as it is, security may be compromised due to access by a third party using the

“Wireless Utility” within the projector’s possible communication area. Before

using the projector, therefore, be sure to set SSID to a character string different

from the default.

Note 2: When you use the Ad hoc communication mode, if there is a similar SSID

network group (for example TDPJ, TDPJ1, TDPJ2, etc.) in the possible

communication area, it is possible that your projector name will not be dis-

played in the Wireless Utility projector list column. If this is the case, set SSID

to a completely different character string.

Enable or disable encryption for security purposes.

Note: Encryption is factory-set to Off. If you use the projector with this setting left

unchanged, security may be compromised due to access by a third party using

the Wireless Utility within the projector’s coverage. Before using the projector,

therefore, be sure to set Encryption to On.

When you have set Encryption to On, the WEP key must be set. For use at an

encryption level of 64-bit, specify a string of 5 arbitrary characters or a string of ten

characters in hexadecimal notation. For use at the 128-bit level, specify a string of 13

arbitrary characters or a string of 26 characters in hexadecimal notation.

Note: Alphabetic characters (A to F, a to f) used in hexadecimal notation are case

insensitive; the uppercase characters and their lowercase equivalents are

handled to be identical.

■ Setting Wireless Utility

If you select Wireless Utility, the following items can be set.

[Yes No] [Apply: ]

Mode: Ad Hoc Infrastructure

Channel: Select a number (1 to 11) using the buttons.

SSID: Specify a desired character string (1 to 32 characters).