Bedienungsanleitung Toshiba tdp tw355 (Seite 29 von 47) (Englisch)

214860

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Operations

■ Computer settings

Refer to instruction manuals of your computer or wireless LAN PC card to perform the

following settings.

• Select Ad hoc (for some PC cards, this is Peer-to-Peer Group).

• [Channel] : You may need to set channels depending on the wireless LAN PC card being

used. Make the [Channel] settings identical to the computer settings.

• Set SSID (for some types of PC card, use Network name instead) as the same as

projector’s SSID (at factory shipment, this is set to TDPJ).

• If Encryption and WEP key are set on the projector, set to the same values.

Note

• The Easy Connect utility

p.70

allows users to easily connect the projector to a computer

over wireless networks, without making network setting. For Easy Connect support, the

computer requires a wireless LAN environment that is NDIS5.1 compliant.

Refer to the user’s manual supplied with the wireless LAN adapter or the wireless LAN

embedded computer for more information.

Setting up the wireless LAN (Continued)

The higher the number of bits, the stronger the encryption, and hence the harder it will

be for a third party to decipher your communications. However, setting higher encryp-

tion levels may slow down communication speed. To set the highest security level,

specify a 128-bit WEP key. For higher security, avoid using a word found in a dictionary

and change the key sometimes.

Set the following item if you have set the communication mode to Infrastructure.

<DHCP>

If you set DHCP to Use, the IP address of the projector is assigned automatically by the

DHCP server. If your network environment does not assign IP addresses automatically,

set DHCP to Not use, then set the following items IP address, Subnet mask and

Gateway manually.

When DHCP is set to Not use, consult with your network administrator for the settings

below and set the IP address manually.

An IP address is a unique number assigned to a terminal. The format is a string of four

dot-separated three-digit numbers. (Example: 111.112.xxx.xxx)

A subnet mask is used to determine what subnet the IP address assigned to a terminal

belongs to. (Example: 255.255.xxx.xxx)

This value specifies the device, such as a router, to be used to access servers outside

the network. It is identified by the IP address. (Example: 111.112.xxx.xxx)

• [Setting initialization]

This item resets the wireless LAN settings to their factory defaults.

• [Projector name]

This can be used to identify projectors when communicating with multiple projectors, or

if there is a possibility that another person who is out of communication range will be

using the same projector. It is recommended this is set to prevent wrong transmission.

Note

•You need to set a different projector name from that used in the item Wired LAN of

the Control setting menu.

• [WEB browser]

Browser authentication and Password are factory-set to Off and no string, respec-

tively. You should set them as soon as possible.

If you have forgotten your password, set it again using the menu on the main unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tdp tw355 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info