Bedienungsanleitung Toshiba tdp tw420 (Seite 39 von 51) (Englisch)

214673

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

76 77

Network and

USB memory

●

How to use [Proﬁ le settings]

This feature allows the user to save the computer’s wireless LAN settings.

This feature is useful when you need to change wireless LAN settings according to

where you use.

Advanced setting

This feature allows the user to set details for Easy Connect settings. Make the following

settings as required in this dialog.

Registering proﬁ le automatically

Check this checkbox to automatically register the settings of the Easy Connect as

proﬁ le setting data.

Switching settings automatically at start-up

Check this checkbox to automatically switch to the last used wireless LAN settings

when launching the Network Utility.

WEB browser

Where the computer and the projector are connected over the network, bring up the

window of Projector Conﬁ guration Tool by pressing the WEB browser button.

Precautions

If the page is not displayed correctly, re-select the projector.

When the network settings are changed, the network connection is disconnected. If

you wish to reconnect, set up the computer again.

Precaution

The simple 1:1 connection, the USB memory connection and the proﬁ le setting may not

work normally depending on the type of the wireless LAN adapter and the wireless LAN

embedded computer. When such a case arises, use the Network Utility menu to make

necessary wireless LAN settings manually.

•

Operating the projector

This function can be used with any projector input.

Launch the Network Utility software application.

The Screen Image transmission mode window appears on the computer’s screen.

Click on the Remote

Control button.

The Remote Control window

appears.

As the Network Utility window is

still displayed, you can operate the

projector via the Remote Control

window, while using the Network

Utility’s functions.

While it is possible to use this function merely to operate the projector, closing the

Network Utility also closes the Remote Control window.

Select the projector to be operated.

In the Remote Control window, click on the button, and select the

desired projector from the pull-down list. When you make a selection, the

Remote Control window displays as shown in the right ﬁ gure.

Only one projector can be selected. (It is not possible to operate multiple

projectors.)

Click on the Remote Control window’s buttons.

The function of each button and box is as follows:

Power On: Turns projector power on.

Power Off: Turns projector power off.

Freeze: The picture is paused.

Input (box): Click on the

button, and select the desired input from the pull-down

list.

Go: Switches to the input selected in the Input box.

Mute: Cuts off picture and sound. Click again to restore picture and sound.

Volume +/–: Adjust sound volume.

Resize Off Restores the picture to its original size.

Resize +/–: Adjusts the enlargement ratio.

: Move screen (up/down/left/right/diagonal)

To quit, click on the button on the Remote Control

window.

Performing this does not close the Network Utility window.

To exit both the Network Utility and the Remote Control, click on the

button on

the Network Utility window.

■

Using the Network Utility (Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba tdp tw420 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info