Bedienungsanleitung Toshiba TDP-TW95 (Seite 15 von 46) (Englisch)

485632

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Operations

■ Using auto setting (Only for input from computer)

This function automatically adjusts the projector settings such as

sampling phase, frequency, screen position, and clamp for each

type of the input signal by using simple operations.

Press the remote control’s AUTO SET button.

For computer input, the icon will appear during processing.

You can set as well by selecting [Auto setting] in the Image

adjustment menu

p.36

Notes

• The image may not be projected or auto adjustment/setting may not be performed

correctly for input signals other than those supported by the projector

p.87

p.88

• If auto setting fails adjustment, adjust manually with [Position] in the Image

adjustment menu

p.36

■ Correcting the keystone distortion

When the projector placement angle against the

screen is changed while projecting the image,

the picture will undergo keystone (trapezoidal)

distortion.

This projector is capable of correcting this keystone

distortion

Press the KEYSTONE button.

The Keystone menu appears. By default, [Auto v-keystone] is selected.

Item Description

Automatically corrects the vertical distortion.

Press .

Screen shrinking at Screen shrinking at

bottom top

Auto v-keystone

V-keystone

Using handy features

Control panel

Remote

Control

Before correction

After correction

Remote

Control

■ Easy setup

This function automatically adjusts the screen focus and corrects the keystone distor-

tion (Auto focus and Auto keystone functions).

Press the EASY SETUP button on the

projector or on the remote control.

The icon will appear during processing.

• Before pressing the EASY SETUP button, be

sure to set Auto focus and select the items to

be adjusted by Auto adjustment

p.41

• With [Power on Easy setup] in the Default

setting menu set to [On], the screen focus is

automatically adjusted and the keystone

distortion (vertical) is corrected when the

power is turned on.

(Automatic keystone distortion correction and

auto-setting are selected by factory setting.)

• The following screen appears during Auto

focus.

Note

•A message appears on the screen if the auto-adjustment fails.

Precautions

•Auto focus function is effective for projection distance from 1.1 m (30 inch at

maximum zoom) to 5.5 m (150 inch at maximum zoom).

• Depending on the room temperature and brightness as well as the projected image

condition and the projecting surface condition and material, the adjustment may not

be properly made. When such a case arises, adjust the screen focus manually.

• Improper adjustment or correction may also occur if the AF sensor is obstructed or

the window gets dirty. Remove the obstruction and clean the AF sensor window in

such a case.

• After performing Easy setup at power-on, the projected image may appear to be out

of focus after a while. In that case, perform Easy setup again.

•Avoid impact on the projector. Otherwise, Auto focus may not work properly.

Control panel

Remote

Control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TDP-TW95 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info