Bedienungsanleitung Toshiba TDP-WX5400 (Seite 29 von 42) (Englisch)

485654

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Operations

The Setting 2 menu

Item

Description

Projection

mode

Set the projection mode. Press

and select the projection mode using

•

Standard—standard forward facing projection.

•

Rear ceiling—inverts and reverses the image for ceiling mounted projection from behind the screen.

•

Rear—reverses the image for projection from behind the screen.

•

Ceiling—inverts the image for standard ceiling mounted projection.

Display time

Set the menu display time. Press

and select the display time using

Continuous/5 sec./15 sec./45 sec.

Background

Set the default background appearance. Press

and select the background using

Blue/None/Logo

Password

Enable or disable the password security feature

p.45

Key lock Enable or disable the key lock security feature. When enabled, the control panel on the

projector is locked—the menus can only be accessed using the remote control.

Press

and select On or Off using

DynamicBlack Enable or disable DynamicBlack. The DynamicBlack feature improves the appearance of black

areas of the projected image. Press

and select On or Off using

RC sensor

Enable or disable the front and reaer remote control sensors. Press and select the

sensor mode using

Both/Front/Rear.

Network

setting

Congure the network settings if the projector is connected to a network. Enable DHCP or

disable DHCP and enter network IP address information in the supplied elds.

Select Apply settings to conrm the network information

p.57

Standby mode

Select the desired standby mode. Press and select the standby mode using

Standard/Power-saving

PC control

Select the path for PC Control. Press and select the PC control path using

PC control/Network



Using the Setting menus (Continued)

Network settings

<DHCP>

If you set DHCP to Enable, the IP address of the projector is assigned automatically

by the DHCP server. If your network environment does not assign IP addresses

automatically, set DHCP to Disable, then set the following items manually.

Note

IP address and Subnet are required elds if DHCP is set to Disable.

When DHCP is set to Disable, consult with your network administrator for the settings

below and set the IP address manually.

An IP address is a unique number assigned to a device. The format is a string of four dot-

separated three-digit numbers. (Example: 111.112.xxx.xxx)

A subnet mask is used to determine what subnet the IP address assigned to a device belongs to.

(Example: 255.255.xxx.xxx)

This value specifies the IP address of the device, such as a router, to be used to access servers

outside the network. (Example: 111.112.xxx.xxx)

<DNS>

This value species the IP address of a Domain Name Server (DNS) if present.

(Example: 111.112.xxx.xxx)

Select Apply settings to conrm the projector’s new network settings.

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TDP-WX5400 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info