Bedienungsanleitung Toshiba TEC FS-2600-1 SERIES (Seite 159 von 210) (Englisch)

626994

159

Zoom out

Zoom in

Vorherige Seite

1/210

Nächste Seite

5. PROGRAMMING OPERATIONS

EO1-11138

5-60

Journal Print

5.4 How to Access a Program Item

P00

SI1%RATE

SI1 TL

0140 11:04TM

NOTES: 1. Whether the calculated amount by the preset SI % rate affects (i.e. add to or subtract from) the

sale total is determined by a program option.

2. To reset the rate once set, enter 0 as the rate. (Then the rate is regarded as 100% if the option

“Non-affect” is selected. With the option “SI Affects Sale Total”, some rate other than “0” should

be programmed.)

Selective Itemizer Functions and Applications

The “Selective Itemizer” is a temporary total memory for each sale and is activated separately from the Main

Itemizer (i.e. sale total memory). If certain PLU items are programmed with the SI (selective itemizer) “net” status,

the Selective Itemizer will function to add up amounts of the SI-net status items in registering the items, while the

Main Itemizer will function to add up all the items in the sale. Thus, near the sale finalization, the operator may

read the SI content by depressing the [SI/TL] key.

A preset % rate may be programmed for each of SI1 and SI2 (on the preceding page), and whether the

calculated amount will add to, subtract from, or non-affect the sale total is a program option. Whether the amount

resulted by depressing the [SI/TL] key will print or non-print is another program option.

The applications of this function may vary from store to store. Some stores may use it for counting the service

stamps to be issued to the customers according to the sale amount of service-stampable items. In this case, the

option “SI Total Non-affects Sale Total” should be selected, and a preset % rate, 1% for example, may be set to

issue one service stamp for every $1.00. Thus the number of stamps to be issued to the customer is displayed

(and printed if so programmed) as a result of calculation with the preset % rate, but the resulted value (the

number of stamps in this case) will not affect the sale total.

Example 1) With option “SI Total Non-affects Sale Total”:

Key Operation in REG Mode Receipt/Journal Print

PLU000001 1.00TS

PLU000002 1.50T

PLU000003 2.00TS

SI1 TL 0.03

SUBTL 4.50

PLU 1 and PLU 3 are programmed with SI-net-status. On depressing [SI/TL], “0.03” (which is 1% of total

amount of PLU 1 “1.00” + PLU 3 “2.00”) is displayed and printed, and 3 stamps are to be issued to the

customer in this case. The sale total “4.50,” is not affected by the SI calculation.

Other stores may use it for calculating the discount amount for certain sales items during a special discount sales

period by presetting the discount % rate on the SI and programming SI-net status to certain PLUs which are

subject to the special discount.

1 [PLU] (SI-net)

2 [PLU] (non-SI)

3 [PLU] (SI-net)

[SI/TL] (1% is preset)

[AT/TL]

S: SI-net Status

Number of stamps to

be issued.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TEC FS-2600-1 SERIES Seite 159

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info