214697
70
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
70
Others
Before calling service personal
Symptom
The power does not come on.
The power turns off while
using the projector.
No image appears.
No sound is heard.
Desired input source cannot be
selected by the INPUT button.
Computer input or Y/PB/PR
input colors are not right.
Computer input or Y/P
B/PR
input image does not appear.
The image is blurred.
Focusing is uneven.
The picture is dim.
Cause
The power cord is disconnected.
The lamp cover is not attached correctly.
The ambient temperature of the projection room is too high.
The lens cover is on.
The wrong input is selected.
The muting mode is on.
The “Brightness” adjustment is at its darkest.
The source is not correctly connected to the projector.
The wrong input is selected.
The muting mode is on.
The sound volume is at the minimum.
The source is not correctly connected to the projector.
Input is not set so that it can be selected with the INPUT button.
By default, only the Component and Video input modes can be selected.
The COMPONENT IN connector’s input setting is wrong.
The signal cable type is wrong.
The COMPONENT IN connector’s input setting is wrong.
The signal cable type is wrong.
The lens is dirty.
The picture is out of focus.
The projection distance is not appropriate.
The projecting light is not hitting the screen squarely.
The “Brightness”, “Contrast”, “Sharpness” or “Phase” adjustments
are not correct.
The “Brightness” or “Contrast” adjustments are not correct.
The lamp life is ending.
Correction
Firmly plug in the power cord.
Attach the cover correctly.
Lower the ambient temperature of the projection room,
and turn the power on.
Take off the lens cover.
Select the input source correctly.
Press MUTE to restore the picture.
Make the “Brightness” adjustment.
Connect the source correctly to the projector.
Select the input source correctly.
Press MUTE to restore the sound.
Adjust the sound volume.
Connect the source correctly to the projector.
Set from the menu screen so that the source can be
selected with the INPUT button.
At the menu screen, set for the proper input signal type.
Use a proper signal cable.
At the menu screen, set for the proper input signal type.
Use a proper signal cable.
Clean the lens with a blower or lens cleaner, etc.
Focus the picture.
Adjust the distance properly.
Adjust the projecting direction so that the light hits the
screen squarely.
Make the “Picture” adjustments.
Make the “Picture” adjustments.
Replace the lamp.
Page
18
69
64
18
26
31
38
21
26
31
27
21
38
38
38
67
27
17
17
44
44
68
Check the following points before asking for support service. Refer also to Trouble indications.
64
Continued
21
23
21
23
70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Toshiba tlp mt7 home projector wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info